Examples of 'bulb holder' in a sentence
Meaning of "bulb holder"
bulb holder - This phrase refers to a device or mechanism used to hold and connect an electric light bulb to a power source. It is commonly used in lamps and light fixtures
How to use "bulb holder" in a sentence
Basic
Advanced
bulb holder
Remove the bulb holder by turning it counterclockwise.
Ensure that bulb is screwed securely in the bulb holder.
Insert the bulb holder in the light.
Replace bulb in holder and push bulb holder securely.
Rotate bulb holder to horizontal position.
Insert a new bulb in the bulb holder up to the stop.
The bulb holder for cord not included.
Insert the new bulb into the bulb holder.
Replace the bulb holder if it is damaged.
The most difficult thing is to remove the bulb holder.
Rotate bulb holder to vertical position before removing bulb.
Push a new bulb into the bulb holder up to the stop.
Reinstall bulb holder and turn clockwise to limit stop.
Reverse above steps to reinstall bulb holder and lens holder.
Secure the bulb holder by screwing the bulb holder.
See also
Then ensure the bulb is screwed securely in the bulb holder.
Insert the bulb holder in the tail lamp assembly.
The ventilation hole is preferably directly opposite the bulb holder.
Replace the bulb holder in the headlamp with the bulb.
X Press a new bulb into the bulb holder.
Remove the bulb holder from the reversing light housing.
If necessary, a gasket is placed between the bulb holder and the housing.
Insert the bulb holder into the light and screw in.
When the bin is full, ice will contact the bin thermostat bulb holder.
Pull bulb holder out of the hole in the backside of the.
X Press the new bulb into the bulb holder and screw it in clockwise.
Unscrew the bulb holder by turning it slightly counterclockwise and pulling it straight out.
Turn the respective bulb anti-clockwise until it stops and remove it from the bulb holder.
Insert the bulb holder with the new bulb into the headlight and turn in a.
X Push new bulb ; into the bulb holder and.
Insert the bulb holder with the new bulb and turn opposite to arrow direction.
Component parts: without bulb holder.
The economy bulb holder is a plastic bulb holder with two clips for connecting wire.
In case of discontinuity, replace the bulb and / or the bulb holder.
Insert the bulb holder with the new bulb into the headlight and turn clockwise.
X Pull bulb ; out of the bulb holder.
Insert the bulb holder with the new bulb into the headlight and turn counter.
The SP5D Mk2 model comes fitted with a belt-driven dynamo and bulb holder.
X Pull out the bulb holder with the bulb.
Unhook the two ends of the retaining spring ( 6 ), located in the bulb holder.
Remove the faulty bulb from the bulb holder C in the direction of the arrow.
Turn the bulb holder anti-clockwise and remove in the direction of the ar.
Remove the faulty bulb from the bulb holder B in the direction of the arrow.
Turn the bulb holder anti-clockwise up to the stop and remove it from the.
Push the connector into the bulb holder and press down on the catch B in.
Insert the bulb holder with the new bulb and turn in an anti-clockwise direction.
For the correct adjustment move the bulb holder downwards by using a screwdriver in slot 2.
Insert the bulb holder with the new bulb and turn in an anti-clockwise direc.
For the correct adjustment move the bulb holder upwards by using a screwdriver in slot 2.
Turn the bulb holder A » Fig . 201in the direction of the arrow as far as the.
You'll also be interested in:
Examples of using Bulb
Show more
Unscrew the bulb cover by turning anticlockwise
They also removed his light bulb
Then turn light bulb counterclockwise to remove
Examples of using Holder
Show more
Support file holder on cutter top plate
Holder advertising material itemnumber price per
This battery holder part is not waterproof
