Examples of 'bump head' in a sentence
Meaning of "bump head"
To 'bump head' means to accidentally hit or collide with one's head against a solid object, resulting in physical impact and potential discomfort or injury. This phrase is often used to describe a minor accident or mishap involving head contact
How to use "bump head" in a sentence
Basic
Advanced
bump head
Mount the bump head by turning anticlockwise.
Replace the spool and the bump head.
Keep bump head below waist level.
Install the upper bump head.
Tap bump head on the ground to advance line.
Remove the spool from the bump head.
Remove the bump head from the drive connector.
The spool should be locked down in the bump head.
Be sure the bump head is properly installed and securely fastened.
Grass wraps round shaft hous ing and bump head.
Hold the bump head and unscrew the bump knob.
Unscrew clockwise the bottom part of the nylon bump head.
The bump head allows the operator to release more cutting line without stopping the motor.
Turn anticlockwise the bottom fixing part of the bump head.
Reinstall the bump head spring into the line trimmer head and push down to seat.
See also
Pull lines while alternately pressing down on and releasing bump head.
The Bump Head cutting attachment allows you to release trimming line without stopping the engine.
This unit is equipped with a Bump Head.
Do not rest the Bump Head TM on the ground while the unit is running.
This is an automatic feed trimmer - Do not bump head against.
Note, Store the bump head parts together for later use.
Install the spring, spool, bump knob and lower bump head.
For best results, tap the Bump Head on bare ground or hard soil.
Replace bump head if cracked, chipped, or damaged in anyway.
Never cut with the bump head located over 76 cm or more above the ground.
Push the bump head down while pulling on line ( s ) to manually advance the line.
