Examples of 'burrs' in a sentence
Meaning of "burrs"
To burr means to make a whirring noise, like the sound of an engine
Show more definitions
- plural of burr
How to use "burrs" in a sentence
Basic
Advanced
burrs
Remove these burrs with a flat file.
Burrs should be sanded off if they are small.
In order to avoid burrs drop in the tubing.
Burrs and unevenness are things of the past.
Clear coffee beans from top of burrs.
Remove burrs from sides of guide bar.
Always replace excessively worn stones or burrs.
Remove burrs and other surface flaws.
File lightly only for removing burrs.
The burrs adhere to the wool of sheep.
They returned home covered with burrs.
This ablates the burrs on the part.
Without material deposit and no damages or burrs.
Remove burrs and rough areas.
The sad ones are like prickly burrs.
See also
Upper and lower burrs are removable for cleaning.
There was little adverse affect from burrs.
We have all got burrs under our saddle.
These pieces of surplus material are known as burrs.
Whether there are burrs on the edges of the bar.
The burrs are usually made of tungsten carbide or diamond.
We will avoid the burrs exactly as you showed us.
Burrs for gold today for sale singpore.
There must be burrs in the pinhole.
The burrs it produces are sharply barbed.
It should not have burrs and other defects.
The burrs are weighing him down.
The growth of burrs slows down.
No burrs or scratch and bright surface.
Cut track as needed and remove all burrs.
Never wash the burrs or burrshaft assembly in water.
This tool may be used with carbide burrs.
Avoid burrs and sharp edges.
All tubes must be cut squarely with no burrs.
Burrs cause many problems in assembly and operation.
Will prevent being cut on sharp edges and burrs.
Burrs may reduce the fatigue life of components.
Prevents being cut on burrs or sharp edges.
All burrs present were effectively removed.
Remove any sharp edges or burrs.
The burrs are manufactured in two steps.
And the end has burrs.
Pieces of burrs can be neatly removed with tweezers.
I can see the burrs here.
These components are sharp and may contain burrs.
Remove burrs from cut edges of pipes with a remover.
Check the skid plate for damage or burrs.
Completely remove all burrs from the cut cross.
Use a fine file to remove burrs.
Remove any burrs or shavings caused by the cutting tool.
