Examples of 'cable ends' in a sentence
Meaning of "cable ends"
cable ends - refers to the points where electrical cables terminate or finish. These ends are usually connected to devices or electrical circuits
How to use "cable ends" in a sentence
Basic
Advanced
cable ends
Cables are manufactured with crimp on cable ends.
Stranded cable ends must be secured.
It is forbidden to leave any unconnected cable ends.
Coat terminals and cable ends with grease.
Free cable ends are not permitted in hazardous areas.
Always keep the cable ends dry.
The cable ends there.
Insert the two remaining cable ends.
Attach the cable ends to the rudder bellcrank.
Never touch uninsulated cable ends.
Insulate any unused cable ends with insulating tape.
Strap ends are also suitable instead of cable ends.
The other end of a cable ends at the desk.
The cable ends are terminated adjacent the cable ports.
Clean terminals and battery cable ends with a.
See also
Never immerse cable ends in the pumped fluid or other liquids.
Remove an insulation of the brown and black cable ends.
Push the stripped cable ends into the sleeves.
Values and measurement ranges relate to open cable ends.
Pull both yellow cable ends out of the middle bundling.
Interchanging the sending and receiving cable ends and.
The loose cable ends are attached to mounts on the rig floor.
Attach the cables to the cable ends at the servo.
It is preferable to carry out the measurement with open cable ends.
Connect the two yellow cable ends with the.
Secure the cable ends with the cable drum retaining screw.
Checking the cable ends.
Lubricate the cable ends with an oil can when each control is activated.
Twisted pair cable ends.
The cable ends should be fastened against fraying with pressed on cable ends.
Clean terminals and battery cable ends with wire brush.
The cable ends must not be stripped too long to avoid short circuits.
Makes sure clear protective covers are removed from cable ends b.
All pumps with free cable ends must be connected by a qualified electrician.
X mains adapter for outdoor unit with open cable ends.
The pins are inserted and the cable ends are inserted into the clamps.
There are various methods for joining or splicing communication cable ends together.
Clean terminals and battery cable ends with wire brush until bright.
The two cable ends are then connected inside the floating connector system.
Clean the battery terminals and cable ends with a wire.
Clamp the cable ends in such a way that the minimum air gaps are maintained.
Secure the cables to the steering arm using the cable ends and sleeves.
And connecting the two cable ends inside the floating connector system.
Use is made of standardized cable termination means for provisionally storing the cable ends.
A further drawback is that the cable ends are only coupled with their cores.
Two cable ends would be deployed close to the location of each OEC.
The present invention relates to a connection protecting device enabling cable ends to be sealingly connected.
Loose or corroded cable ends prevent your battery from maintaining a full state of charge.
Install the fuseholder under the hood and prepare the cable ends as stated above.
Let open cable ends ONLY assemble by experienced electrician.
You'll also be interested in:
Examples of using Ends
Show more
Take the ends of the hair fig
Ends designed to facilitate continuous row mounting
Check that both ends are correctly plugged in
Examples of using Cable
Show more
Secure the coaxial cable to the ceiling
A cable tie is provided with the appliance
Use plenum rated cable where it is required
