Examples of 'cables should' in a sentence
Meaning of "cables should"
cables should: Suggests the necessity or recommendation for specific types of wires or cords to be utilized in a particular context, such as for connections or electrical purposes
How to use "cables should" in a sentence
Basic
Advanced
cables should
All cables should be unplugged when transporting.
Motor and battery cables should be twisted.
Cables should not be rubbing on moving components.
Response of the cables should be evaluated carefully.
Cables should be placed so they are out of the.
Only shielded interface cables should be used.
Both cables should be the same length.
It is important to note that cables should not be lubricated.
Both cables should be of the same kind.
Redundant power lines and cables should be removed.
Cables should also be secured in place to avoid movement.
None of the connecting cables should be bent or squashed.
All cables should be kept as short as is practically possible.
Only approved cables should be used.
Cables should be thoroughly flushed with water after.
See also
The special cables should be used.
Cables should only be used on the rear wheels.
He suggests the cables should go underground.
Cables should be hidden and fastened.
None of the cables should touch the roof.
Cables should be securely attached and free of corrosion.
Power cables and telecommunications cables should be protected.
The welding cables should be as short as possible.
It should not have any corrosion marks on it and the cables should be tight.
All cables should be carefully secured.
The picture shows how the cables should come out correctly.
Both cables should have the same length.
O The left and right speaker cables should be the same length.
Adapter cables should be quite straightened to avoid overheating.
This PRODUCT and its cables should be.
So the cables should be plugged in here and here.
Worn-out plugs and damaged cables should be replaced.
All cables should be as short as possible.
For instance, charging cables should be short and thick.
Cables should be bundled to the side of the switch.
Therefore the mains cables should be kept as short as possible.
Cables should point up when installing in the verical position.
All the wires and cables should be run correctly.
All cables should be carefully inspected to detect defects in insulation.
Electrical leads and cables should not to touch the oven.
The cables should be inserted completely into the sockets.
Shielded audio and video cables should be used between components.
All cables should be laid so that they can not be.
There is a risk of mechanical damage, armoured cables should be used.
Both cables should be of the same type and length.
To eliminate safety hazards, damaged cables should always be replaced by a techni.
The cables should be fed through the cable glands.
In order to do this successfully the cables should be connected in this exact order,.
The cables should be pulled with a loop during assembly.
Where possible, probe interconnect cables should be oriented normal to the electric field.
You'll also be interested in:
Examples of using Cables
Show more
Run cables across foam gasket block
Check the battery cables and terminals
Power cables may not be submerged in water
