Examples of 'calc-clean' in a sentence
Meaning of "calc-clean"
Calc-clean (adjective) - refers to a surface that is clean to a very high standard, often used in the context of cleanliness of laboratory equipment
How to use "calc-clean" in a sentence
Basic
Advanced
calc-clean
The Calc-Clean process has not been completed.
Then you need to perform the Calc-Clean process.
The Calc-Clean tool is equipped with a magnet.
Appliance and perform the Calc-Clean procedure under supervision.
The Calc-Clean reminder light has been activated.
Steam escapes from under the Calc-Clean rinsing knob.
The Calc-Clean function helps remove scale particles.
You have not performed Calc-Clean function for some time.
The Calc-Clean function removes the scale particles.
Push the steam control to the Calc-Clean position and hold it.
The Calc-Clean light flashes and the appliance beeps.
Do not leave the appliance unattended during the Calc-Clean process.
Use the Calc-Clean function once every two weeks.
You have not done or have not completed the Calc-Clean process.
Use the Calc-Clean function one or more times see.
See also
Therefore, it is recommended to perform the calc-clean process at least once a month.
Release the Calc-Clean button as soon as all the water in the tank.
You may not have tightened the Calc-Clean rinsing cap properly.
Repeat the Calc-Clean process if the iron still contains a lot of impurities.
Switch off the appliance and tighten the Calc-Clean rinsing knob properly.
Remove the Calc-Clean tool from the coffee spout.
The steam function has been disabled until you have performed the Calc-Clean process.
The Calc-Clean function removes the scale particles from the iron.
Let the appliance cool down sufficiently before you remove the Calc-Clean rinsing cap.
You can use the calc-clean function to remove scale and impurities.
First remove the cord storage hook and then remove the Calc-Clean rinsing cap.
After the Calc-Clean process remaining water may drip out of the soleplate.
You can continue steam ironing for 1 hour while the Calc-Clean light flashes and the appliance.
Firmly screw the Calc-Clean rinsing cap clockwise onto the steam tank.
O no steam i moderate steam ; maximum steam x Calc-Clean function.
Never remove the Calc-Clean rinsing cap when the steam tank is hot.
Make sure that you empty the Calc-Clean.
Use the calc-clean function until all flakes and impurities have been disposed of.
Problem Possible cause Solution The Calc-Clean process has not been completed.
Place the Calc-Clean container on the ironing board or any other even, stable surface.
Sound and light Calc-Clean reminder.
Perform the Calc-Clean process to enable the steam function again see chapter ‘Cleaning and maintenance.
To minimise this, perform the Calc-Clean process regularly.
With the Calc-Clean container provided, you can perform descaling easily and get clean steam.
Wait approximately 5 minutes before emptying the Calc-Clean container.
You have not tightened the Calc-Clean rinsing knob properly after descaling.
The Calc-Clean light flashes and the appliance beeps every time I press the steam trigger.
You have accidentally started the Calc-Clean process see chapter ' Cleaning and maintenance.
The Calc-Clean light flashes and / or the appliance beeps.
This is the Calc-Clean reminder.
Hold the iron over the sink, press and hold the Calc-Clean button.
You have not pressed the Calc-Clean button for 2 seconds until the appliance started beeping.
To indicate that you have to perform the Calc-Clean process Fig . 4.
Make sure that you empty the Calc-Clean container before you start the Calc-Clean process.
Warning, Do not leave the appliance unattended during the Calc-Clean process.
