Examples of 'calibration factor' in a sentence
Meaning of "calibration factor"
Calibration factor refers to a constant value or ratio that is used to adjust or correct measurements taken by an instrument or device. It is commonly used in scientific and technical fields to ensure the accuracy and reliability of measurements. The calibration factor is determined through a calibration process, which involves comparing the measurements of the instrument to a known standard or reference
How to use "calibration factor" in a sentence
Basic
Advanced
calibration factor
The calibration factor is then applied to this total.
The zero dB line is determined by the calibration factor.
The calibration factor is a parameter used by the microprocessor.
Each new measurement is multiplied by the calibration factor.
The calibration factor is constant over numerous measurements.
Oxygen saturation levels were calculated using a calibration factor.
Calibration factor of a data channel.
You can also enter the calibration factor manually.
This calibration factor can be determined by carrying out a calibration.
Sensitivity coefficient calibration factor.
The calibration factor for the field dosimeter is then given by.
The response of the detector is noted and a calibration factor is calculated.
Evaluate the calibration factor reciprocal of the slope of the line.
Resistance may be converted to resistivity by multiplication by a predetermined empirical calibration factor.
The value of each calibration factor depends on the gas in question.
See also
This provides relevant data which can be processed to determine a calibration factor.
A calibration factor zgr is used to account for variations in the background.
The device calculates and displays the calibration factor on the second row of.
The calibration factor for a pulp can be easily obtained as follow.
An onboard microprocessor can easily determine and store a calibration factor for the vehicle.
Automatic calculation of the calibration factor when pipe geometry data are entered in the transmitter.
When the calibration fails or you cancel the calibration the previous calibration factor is used.
The cube calibration factor is preferably determined initially for every new calibration cube.
We now go on to Direct change of the calibration factor.
The calibration factor is digitally stored in a calibration factor memory region of the electrical device.
The LVDT was calibrated using step heights and the calibration factor acquired.
The calibration factor depends on the lignin content and its fluorescence property in those fibres.
The microprocessor can thereby acquire and remember a calibration factor for each Hall effect sensor.
Set calibration factor manually Choose either of the following.
The outcome was a test-tank calibration factor to be used in the comparison.
Calibration Factor adjusted automatically every second.
Furthermore, the updating step also takes account of the calibration factor.
Can not calculate calibration factor Will show when trying to calibrate with no calibration weight.
During training, there is also the possibility to set the calibration factor manually.
This suggests that one calibration factor could be applied to TMP fibres from most species.
Their collective effects can, however, be determined and reduced with a single calibration factor.
The second calibration factor is such that EPMATHMARKEREP.
A post-stratification estimator was used - it modifies the natural weight of the design through a calibration factor.
The first calibration factor is such that EPMATHMARKEREP.
If youmanually calibrate your stride sensor later, the GPS based calibration factor will be overwritten.
Set Calibration Factor Manually There are two options for setting the calibration factor manually.
After the restart cycle, the meter uses the calibration factor that has just been confirmed.
The sensor calibration factor is also valid for gas measure - ment.
CALIBRATION PROCEDURE K24 permits making quick and precise electronic calibration by changing the calibration factor k factor.
Likewise, the calibration factor may be flow dependent.
Each user ( the SummaCut has a total of 4 ) can hold a different calibration factor.
A is a calibration factor determined as,.
Current total, unit of measure, and calibration factor are displayed.
The calibration factor can be stored within block 61 and periodically updated as necessary.
Alternatively, you can provide the calibration factor manually using the UP / DOWN buttons.
You'll also be interested in:
Examples of using Calibration
Show more
Most resent calibration of the climatic cabinet
Generate an audit record except in calibration mode
Most recent calibration of the calibration lamp
Examples of using Factor
Show more
Brake factor and brake threshold torque
Collective memory as a main factor in community resilience
Another factor is the scope of policy framework
