Examples of 'calorimeter' in a sentence
Meaning of "calorimeter"
A calorimeter is a device used for measuring the heat generated or absorbed in a chemical reaction or physical change
Show more definitions
- An apparatus for measuring the heat generated or absorbed by either a chemical reaction, change of phase or some other physical change.
How to use "calorimeter" in a sentence
Basic
Advanced
calorimeter
Mounting both calorimeter and cabinet is required.
Each evaporator shall be tested on a separate calorimeter.
A calorimeter testing a unit using liquefied gases.
Slowly open steam valve upstream of calorimeter.
When the calorimeter reaches its peak.
Each evaporator is fitted onto a separate calorimeter.
A calorimeter at the end distinguishes electrons from muons.
Each evaporator shall be tested in a separate calorimeter.
Two types of calorimeter are generally used.
Calculate the heat capacity of the calorimeter.
It concerns a calorimeter of diathermal type with power compensation.
The measurements are performed on the abovementioned calorimeter.
The calorimeter was standardized with benzoic acid beforehand.
So a homogeneous crystal calorimeter seems to be suitable.
Calorimeter for measuring the energy transported by radiation.
See also
Difference between calorimeter and a thermocouple.
A calorimeter is an isolated system so no heat is lost to the surroundings.
Each evaporator is installed in a separate calorimeter.
It is a calorimeter of diathermal heat flow type.
The smallest subdivision in the calorimeter was called a cell.
This heat quantity is measured in a previously calibrated calorimeter.
Securing sensor cables to calorimeter assembly to relieve stress is recommended.
The values are conventionally measured with a bomb calorimeter.
Ucoefficient of calorimeter when fitted with the tested refrigeration.
The operating principle is similar to that of a calorimeter in thermodynamics.
Its electromagnetic calorimeter is in particular characterized with an electronic calibration.
Study of runaway reactions based on adiabatic calorimeter measurements.
No calorimeter is perfect because it can lose heat to its surroundings.
Calculating the heat capacity of a calorimeter.
This included new types of calorimeter and photometer detectors.
Located at the end is an electromagnetic calorimeter.
It is preferable to use a calibrated calorimeter box to obtain maximum accuracy.
The measurements are carried out on the abovementioned calorimeter.
An instrument called a bomb calorimeter is used to measure energy content.
Excess heat is measured with a calorimeter.
The graphite calorimeter is one of these reference measuring instruments.
If the heat capacity of the calorimeter is.
Each calorimeter cell is read out by two photomultiplier tubes.
Crystallinity can be determined using a differential scanning calorimeter.
The calorimeter assembly is lowered into the water bath.
Gross energy is determined in an adiabatic calorimeter.
Cone calorimeter results are set out in the following table.
Tg is measured using a differential scanning calorimeter.
The calorimeter was sealed and the temperature recorder started.
The heat absorbed by the calorimeter is.
Calorimeter assemblies and cabinets are matched sets and are not interchangeable.
Surrounding the inner tracker is a calorimeter.
Valve just upstream from calorimeter is closed or not fully open.
Confirm that calibrated orifice is between tee and calorimeter.
They are able to pass through the calorimeter without being absorbed.
