Examples of 'cam surface' in a sentence
Meaning of "cam surface"
Cam surface refers to the curved or uneven surface of a cam, which is a mechanical device used to convert rotational motion into linear motion. The shape of the cam surface determines the specific motion output
How to use "cam surface" in a sentence
Basic
Advanced
cam surface
One of said jaws is connected to a cam surface.
The cam surface of the cam is helical in shape.
At least said one cam surface may be a groove.
The clutch housing includes an inner cam surface.
At least one said cam surface may be a protrusion.
The cam has a notch and a cam surface.
The cam surface is preferably grooved.
The housing defines a cam surface.
The cam surface is preferably in the form of an irregular helix.
This permits a reduced length of the cam surface.
Substantial portion of the cam surface has a concave profile.
The cam surface may be a ramp inclined to the horizontal.
They are each formed by a fixed ramp forming a cam surface.
The cam has at least one cam surface formed on it.
This is surrounded by a compression grommet which has a cam surface.
See also
The cam surface is formed at a free end of the elastic blade.
The angle used for the cam surface is not critical.
Such cam surface may be just a round tip of a pusher bar.
The trailing surface is desirably a cam surface or angled to facilitate this.
A cam surface on an edge of each cam abuts against a fixed post.
Each detent has a lateral passage with a sloped cam surface.
Preferably the cam surface is defined by the head of the screw.
The insert includes an insert through hole and a cam surface.
The lowest level of the cam surface corresponds to the pressing stage.
Each shield lug is rectangularly shaped having a planar cam surface.
A cam surface is provided on the strike face and leads to the notch.
The fitment provides the necessary cam surface flanges and stops.
The curved cam surface allows the rocking motion of the chair.
An outer surface of the sleeve includes a cam surface adapted to act on a plunger.
The cam surface may also be convexly curved in the sagittal plane.
Preferably the blocking plate is integral with the moveable cam surface.
The cam surface is adapted to engage with cam followers on the movable sheave.
The cams may be different sizes and have an arcuate cam surface.
The hinge can include a cam surface that acts on the locking member.
The stop may preferably be in the form of a step in the cam surface.
Rotatable pin has been described presenting a cam surface defined by the base of a notch.
Each shield lug is preferably triangularly shaped having a planar cam surface.
The posterior cam includes a concave cam surface and a convex cam surface.
Each replaceable sector can include a portion of the full cam surface.
The mandrel guide can have a cam surface corresponding to the closed mandrel path.
The spine of the tibial bearing may include a posterior cam surface.
The inferior cam surface of the spine may be concavely curved in the sagittal plane.
In an intermediate position the movable jaw comprises a cam surface to open the pincer.
A cam surface of zero height means a height that a butt of full height can pass by.
The release member may define an inner cam surface adjacent the opening.
The curved cam surface has a notch to receive the sear point of the cam.
The cam plate is fixed to a gripper pad and has a tapered cam surface.
A flush mounted cam has a cam surface between upper surface and lower surface.
The mating surfaces of the piston and rotor are each provided with a cam surface.
The flared end has a cam surface engaged with cam surfaces of the locking members.
You'll also be interested in:
Examples of using Cam
Show more
I will have cam check the dna
Cams can be directly connected to cam disks
I put a nanny cam in the locker room
Examples of using Surface
Show more
An uneven surface increases the risk of overturning
Where ϑ is the measured test surface temperature
All feasible surface and subsurface ECVs
