Examples of 'carbon fi' in a sentence
Meaning of "carbon fi"
carbon fi - A shortened way to refer to carbon fiber, a material known for its lightweight and high-strength properties. It is commonly used in industries such as aerospace, automotive, and sports equipment
How to use "carbon fi" in a sentence
Basic
Advanced
carbon fi
Make sure the carbon fi lter is in place.
The body is also made entirely of carbon fi bre.
The carbon fi lter is not included.
For the correct operation of the appliance it is necessary to install a carbon fi lter.
The carbon fi lter mats just need to be cut to size.
Remove the saturated activated carbon fi lter by releasing the fi xing hooks.
The carbon fi lter must be in place for the air cleaner to operate.
Check whether the carbon fi lter is not too dirty.
Regularly clean the aluminium fi lters and regularly replace the carbon fi lters.
To remove the carbon fi lter turn it in the anticlockwise direction.
In that case, it is necessary to purchase the carbon fi lter.
Make sure not to damage the carbon fi lament during the cleaning process.
Needing to diversify its funding sources, GERES explores innovative solutions such as carbon fi nance.
Never wash the carbon fi lter in water unless the manufacturer states otherwise.
When button A fl ashes at a frequency of 0.5 seconds, the carbon fi lters must be replaced.
See also
You can purchase new carbon fi lters in almost all shops selling household goods.
Only use Blade Fusion 480 approved carbon fi ber main blades.
Want a carbon fi bre dashboard or is leather more to your taste?
Under normal operating conditions, the carbon fi lter should last from three to six months.
The carbon fi lter 10 is also located behind the plastic fi lter 9.
Make sure pre-fi lter and carbon fi lter are both properly installed.
The carbon fi lter 10 should be cleaned every 2 weeks and changed every 6 months.
Remove the saturated activated carbon fi lter by releas - ing the fi xing hooks.
An active carbon fi lter must be used if the chlorine level exceeds 0,2 mg / l.
Now remove the carbon fi lter 10.
Sanding or fi ling carbon fi ber, such as frame plates, may produce carbon dust.
Only use Blade 700 X approved carbon fi ber main blades.
Occasionally, the carbon fi lter will need cleaning.
Fit the 2 activated carbon fi lters into position as shown in.
I7.2 Cleaning activated carbon fi lters on customer side.
You'll also be interested in:
Examples of using Fi
Show more
Hold the equipment fi rmly by the handle
This fi lm may be removed by carefully lifting at a corner
Place unit in the fi nal installation location
Examples of using Carbon
Show more
Know the symptoms of carbon monoxide poisoning
Carbon of vegetable origin for use in fireworks
A molar hydrogen to carbon ratio of the fuel
