Examples of 'center punch' in a sentence
Meaning of "center punch"
center punch - a tool used to create a small indentation for drilling or marking a precise spot on a material
Show more definitions
- To create a small hole or indentation in a workpiece as a guide in preparation for drilling.
- A tool used to create a small indentation in preparation for drilling a hole.
- The small indentation created by such a tool.
How to use "center punch" in a sentence
Basic
Advanced
center punch
Use a center punch to start the hole.
Mark center of hole with center punch.
The need to center punch is effectively eliminated.
He also took out the window with something like a center punch.
Use a center punch to make a small dent in work.
Mark the hole locations on the workpiece and center punch at these locations.
Center punch the two holes marked on the template.
Accurately center punch all holes.
Center punch the point you have marked for drilling.
Like a center punch.
Make a small indent to mark the desired drilling location using a center punch.
Make a center punch in the material for easier starting.
In this case, the punching tool is known as a center punch.
The axis of the center punch is maintained in a reference position.
If you are uncertain about the suitability of a base material, perform a center punch test.
See also
Use center punch to make center punch mark not included.
When drilling hard, smooth surfaces, use a center punch to mark the desired hole location.
Use a center punch to make a slight indentation for your drill bit.
When drilling into a hard smooth surface, use a center punch to mark the desired hole location.
Carefully center punch at the two locations for the antenna mounting holes.
Other double-structured punches include a double-structured punch of the type having a center punch fixed.
Use a hammer and center punch to mark drilling location on water pipe.
Locate area to be drilled . Mark center of hole with center punch.
The automatic center punch mechanism has been used for a wide variety of other applications.
To drill a hole in the center of a round piece, a center punch mark is necessary PICTURE 9.
Center punch all 6 mounting holes on the template and drill with an 1/8 " drill bit.
Cruz, grab me your center punch.
As much as we have. Mouch, take the center punch.
Mouch, take the center punch.
The wire exit locations 12 also can be marked with the center punch 30.
Cruz, hand me your center punch.
