Examples of 'center tap' in a sentence
Meaning of "center tap"
center tap: In the context of electronics or electrical engineering, it refers to a way of controlling the flow of current in a circuit by connecting to the center of a transformer winding
Show more definitions
- A contact made to a point halfway along a winding of a transformer or inductor.
How to use "center tap" in a sentence
Basic
Advanced
center tap
Input transformer with center tap floating.
The negative numbers correspond to taps having delays less than the center tap.
This delay matches the pixel delay for the center tap through the horizontal filter.
As another alternative, two coils may be serially arranged but with a center tap.
Also connected to center tap K is the line 18 leading to the switching network SW.
They each have a center tap.
The senior center tap show starts in 10 minutes.
Input circuitry incorporating transformer with center tap ungrounded.
The primary winding L1 comprises a center tap connected to one of the power supply terminals 19.
Input circuitry incorporating transformer without center tap un grounded.
Center tap is isolated for ± 2kV from ground Slew Rate.
This is achieved by inserting an inductor in the transformer center tap supply.
The entry values C and C * refer to the center tap with a delay of c sample periods.
Reconstruction of a particular transition starts when a tap other than the center tap is accessed.
A third terminal of the center tap transformer 460 is connected to the second terminal 60b.
See also
The beginning of the transition will arrive at the center tap 11 sample periods later.
The senior center tap show starts in 10 minutes . Let us go, Jack.
Using four devices instead of two, this design eliminates the need for the center tap.
A choke is connected between the center tap 34 of primary winding 32 and the regulated power inlet 40.
Figure 3, Input circuitry incorporating transformer without center tap ungrounded.
In addition, the transformer 11 can be designed to be without having a center tap.
A DC / AC superimposed signal is provided as an input to a center tap of the transformer T ₃.
A primary transformer winding has a first end, a second end, and a center tap.
The layout of FIG . 9 describes a star-connected power supply with center tap for the three-phase motor.
Figure 2, Input circuitry incorporating transformer with center tap ungrounded.
Transformer 54 may also have a grounded center tap 54a for safety.
Fig . 4, Input transformer without center tap ungrounded.
Fig . 3, Input transformer with center tap ungrounded.
The entries " C * " also indicate a center tap connection.
You'll also be interested in:
Examples of using Tap
Show more
The water tap is blocked or there is limescale on it
Fit new gasket seal to replacement tap
Tap into electronic forms of data collection
Examples of using Center
Show more
Insert center hinge pin and tighten
My wife runs the day care center
You are not the center of the world
