Examples of 'chain guide' in a sentence
Meaning of "chain guide"
In mechanical engineering or cycling, a chain guide is a device that helps maintain the tension and alignment of a bicycle chain as it moves through various gears. It prevents the chain from skipping off the sprockets and provides smooth and reliable gear shifting
How to use "chain guide" in a sentence
Basic
Advanced
chain guide
The chain guide serves as an earth connection.
Place handle against the chain guide or in.
Position of chain guide profiles for MatTop chains.
Do not reach into the chain guide.
Push in the chain guide and screw tight.
Chain guide for a screen group.
An additional chain guide is not required.
Do not let handle fly into chain guide.
Push chain guide in and tighten the screws.
Mounting the propulsion unit to the chain guide.
Worn chains and chain guide bars should be replaced.
Pass the chain w through the chain guide r fork.
The chain guide rail has a variably adjustable stopper.
A spacer is located between the pair of chain guide plates.
Remove chain guide from the bottom of the housing.
See also
The container can be screwed onto the chain guide.
The chain guide plates include a disengagement part guide.
If there are visible defects replace the chain and the chain guide.
The chain guide plate includes a disengagement part guide.
The spacer defines a distance between the pair of chain guide plates.
A chain guide plate and a chain locus regulating means.
You will want to reinstall the chain guide in the same position later.
Chain guide pulley.
Wrap hand chain around hand chain wheel and through chain guide.
The aluminium chain guide is supplied in standard dimensions see accessories.
With stripping the plough installations in use have differing chain guide systems.
Position the outer chain guide of the front derailleur approximately.
Means for promoting an output of the chain from said return chain guide channel.
Reinforced chain guide for optimum protection and service life.
Is a diagram showing a state of contact between a chain guide plate and the interlocking chains.
Chain guide device.
In other embodiments, the recharging port is supported by the chain guide.
Take out the chain guide on the bottom side of the casing.
Alternatively, the recharging circuit can be supported by the chain guide.
Check the end of the chain guide for oil indicating correct lubrication.
However, several difficulties arise in the practice of this chain guide style.
The chain guide bar and chain may become hot during use.
When working, check the end of the chain guide for oil every hour.
The chain guide and hold down must also be replaced along with the chain.
Preferably, the derailleur comprises a slack recovery spring that biases the chain guide.
The chain guide assemblies can define at least one of straight and curved section paths.
Adjust the range of motion for the chain guide using the two limit screws 1.
Incorrect chain guide position Adjust chain guide as necessary.
Even more preferably, the housing portion of the container is co-molded with the chain guide.
Position the chain guide bar on the stud bolts Fig.
Place the saw chain in the chain guide 7.
Insert the chain guide teeth into the groove of the bar Fig.
Easy access to the chain wheel and internal chain guide - easily inspected and replaced.
The chain guide and hold-down must also be replaced with the chain.
When replacing the load chain, the chain guide and the hold-down must also be replaced.
You'll also be interested in:
Examples of using Guide
Show more
This guide should be considered an evolving document
Find your subject guide to get started
Guide at any time without prior notice
Examples of using Chain
Show more
I had the chain around its neck
Chain of command is very important in our thing
Direction of the chain movement and teeth
