Examples of 'chamfer' in a sentence
Meaning of "chamfer"
Chamfer is a beveled edge or corner connecting two surfaces. It is often used in carpentry, engineering, and architecture to prevent sharp edges
Show more definitions
- An obtuse-angled relief or cut at an edge added for a finished appearance and to break sharp edges.
- To cut off the edge or corner of something.
- To cut a groove in something.
How to use "chamfer" in a sentence
Basic
Advanced
chamfer
Chamfer all exposed edges of decorative laminate to.
Cutting the chamfer between the lines.
Chamfer all exposed edges of decorative countertop.
The ball comes with a chamfer on center.
We can chamfer either unilateral or on both sides.
Selects a single solid or surface edge to chamfer.
Make a test chamfer on a scrap piece of wood.
It thus initially forms a conical surface chamfer.
Safety chamfer in order to avoid groove formation.
The finger grip may be surrounded by a chamfer.
The chamfer can be produced by such an arrangement.
This limits the usefulness of the chamfer.
A chamfer line is inserted between the two objects.
Prepare margins with deep chamfer or rounded shoulder.
The chamfer margin is defined in the input field.
See also
Activates a circumferential chamfer for the selected layer.
To chamfer two nonparallel line segments.
The geometry of each chamfer may be planar or curved.
The chamfer is created as shown in the following figure.
These liners include a chamfer as the rim surface.
Chamfer the edges of the daikon.
Sharp edge broken by radius or chamfer.
Dimensions the chamfer of the spacer if one is present.
The external cladding to this house is chamfer boards.
Cutting chamfer included in the tolerance.
Versatile tool for many different chamfer operations.
Requires a chamfer length and an angle.
Said blind recess includes a chamfer.
Sets the chamfer distances for the rectangle.
Enter the second chamfer distance.
The core may have at least one chamfer.
Controls the chamfer distance with a mathematical expression.
The body can comprise a chamfer and an opening.
One example of a possible rim surface geometry is a chamfer.
You have to chamfer the corners of the blades.
The surfaces may comprise a chamfer.
Most wheels have a chamfer applied to the center hole.
To set the height and chamfer.
Tiles have sometimes a chamfer around the outer contour.
Chamfer defined by the corner point and chamfer length.
This oblique cut enables the chamfer to be produced directly.
To chamfer multiple sets of objects.
Requires two chamfer distances.
The chamfer is hereby passed to the lowest longitudinal reinforcement.
Enter the chamfer angle.
Chamfer pipe and have it ready for glue in seconds.
In the same way the chamfer allows to work in depth.
In the input field you define the chamfer spacing.
You should chamfer the through hole before reaming.
Square nut without chamfer.
