Examples of 'chamfering' in a sentence
Meaning of "chamfering"
Chamfer as a verb means to cut away a right-angled edge or corner to make a symmetrical sloping edge
Show more definitions
- present participle of chamfer
- A chamfer.
How to use "chamfering" in a sentence
Basic
Advanced
chamfering
Activates chamfering for the wall layer.
This offset value depends on the extent of chamfering.
Pipe chamfering tool for plastic pipes.
The CrazyMill range meets highest standards of chamfering.
The corresponding chamfering is of the order of a few degrees.
An alternative processing method is laser chamfering.
Chamfering corners facilitates efficiency in machining.
Very good edge chamfering was achieved.
Chamfering should not be used unless.
New phase in chamfering efficiency.
Chamfering and deburring tools.
Also known as chamfering machine.
Chamfering of wires and tubes.
The purpose for this groove is chamfering edges of boards.
The chamfering of the profiles is labour and time consuming.
See also
Robotic deburring and chamfering.
Chamfering means cutting a furrow in the sheet in the form of a column.
Milling machine for chamfering.
Gear chamfering machine.
A preventive treatment of this kind could be for example a chamfering.
Tooth chamfering machine.
At the corners of there may be some chamfering of the film.
Hatches chamfering boundaries.
An object of the invention is to overcome the drawbacks of conventional chamfering machines.
Chamfering of the edge.
It has also been found that chamfering the bent portion is effective.
The corresponding point of processing is used as the processing point of chamfering.
Lens shaping and lens chamfering can be accomplished in a single operation.
Make sure the swivel arm is fixed securely in position when chamfering.
The bevelling includes chamfering and curving of the edge portion.
Chamfering of plates.
This makes it difficult to smoothly perform chamfering and burring processing.
For chamfering the fence and depth stop need not be fitted.
The device is also suitable for chamfering edges and for rebating.
Chamfering is required.
Tumbling is a preferred method for deburring and chamfering because of its convenience.
In this case the chamfering is trumpet shaped with a constant radius of curvature.
Selecting means for selecting whether or not the chamfering processing is performed.
Undercutting means chamfering the bottom edge of tone holes inside the bore.
The straight guide is effectively used for straight cuts when chamfering or grooving.
It is also preferable that chamfering is performed along the sides of an antimicrobial glass.
Reduced machining time thanks to the combination of drilling and chamfering in a single operation.
Such chamfering or convex profile assists the two mounting elements to engage smoothly.
The planer has been designed with chamfering grooves in the front base plate.
Chamfering a hatch boundary that was defined from line segments removes hatch associativity.
One method to reduce the turbulences is the chamfering of the edges of the inlet.
The chamfering is made after cutting the panel and after forming coupling means.
The planer sole has a groove running along its length for even guidance when chamfering edges.
The chamfering tool does not have a face for edging the edge face of the lens.
Trimmer base assembly For chamfering with straight bit.
