Examples of 'change in phase' in a sentence
Meaning of "change in phase"
change in phase - This phrase is commonly used in science to describe the transition of a substance from one state (solid, liquid, gas) to another due to specific conditions like temperature or pressure
How to use "change in phase" in a sentence
Basic
Advanced
change in phase
The change in phase is regular and periodic.
The temperature at which a change in phase occurs.
The required change in phase relation may in practice be relatively small.
This may typically be implemented as either a change in phase advance or current waveform.
This change in phase can represent a code which contains the information bit.
Melting is a change in phase state.
A change in the polarisation of the light generally corresponds to a change in phase behaviour.
The amount of change in phase depends on the frequency.
Thus the change in frame no longer causes any abrupt change in phase difference.
The details of the change in phase in such circumstances are as follows.
The heat storage fluid therefore experiences a drop in temperature possibly accompanied by a change in phase.
The frequency of a signal is the change in phase divided by the change in time.
The change in phase is then applied to each slot for the second encoded block.
A phase constant represents the change in phase per unit length for a standing plane wave.
This difference results in an error voltage 40 which directly corresponds to this change in phase.
See also
A maximum phase change AΦ of said change in phase is greater than π.
Furthermore, a change in phase takes place on the outside of the reactor.
Whether or not the change is actually a 90 degree change in phase is not important.
Figure 9 shows the change in phase and impedance shifting with loading.
Ice melts into liquid water . Melting is a change in phase state.
Before the change in phase can occur, seven different phase changing values must prepared.
What? Melting is a change in phase state.
The change in phase Aθλ can be measured at a given frequency, λ.
Such expansion valve 19 also allows for a change in phase.
Accordingly, no change in phase is performed on the pilot symbols inserted in z2 '.
The heat needed to induce a given change in phase is given by q = n × ΔH.
This change in phase appears in the comparison signal fed to the comparator 18.
FIG . 12 shows the change in phase shift through the section as a function of frequency.
A change in phase shift occurs when ablation electrode 32 is brought into contact with wall 37.
During a change in phase of the flight, the setting applied to the valve 14 is changed.
You'll also be interested in:
Examples of using Phase
Show more
The first phase evolved over millennia
Review of the execution of the design phase
The results of phase two have been amazing
Examples of using Change
Show more
Ming will not change his mind
Change duct size gradually to minimize turbulence
You can even change your name to
