Examples of 'channel button' in a sentence
Meaning of "channel button"
channel button - This typically refers to the button on a remote control or device that is used to change TV channels or switch between different modes
How to use "channel button" in a sentence
Basic
Advanced
channel button
Push the channel button on the parents unit.
And this is the channel button.
The channel button on the tv remote under the books.
To deactivate the function press the channel button and the symbol disappears.
Press the channel button on the receiver to select the same.
Choose the respective transmitter by pressing the Channel button.
Press and hold channel button until the circle.
Channel Button up or down.
Press and hold the Channel button for four seconds.
Select a different channel for each outdoor sensor by pressing the channel button 37.
Press the channel button of the camera you want to control.
To display a camera image as a full image, press the corresponding camera channel button 1.
Press the channel button that corresponds to the channel number you wish to set.
To return to the program, select a Channel button again.
Press and hold channel button until the circle symbol appears for alternating channel.
See also
In this way, FDM operates much like the channel button on your television set.
Touch the Channel button to select the control to adjust.
If more than one outdoor sensor is activated, press the channel button 37 to select one.
Press any Channel button to load that patch.
To delete all anchors (apart from both ends), click on the Reset Channel button.
Press the Channel button on the left to see the Channel view.
After replacing the batteries on the remote sensor, press and hold the channel button [ F ] for.
Press the B channel button on the vectorscope.
When multiple sensors ( channels ) are used, press the channel button [ F ] to move to the next.
Hold the channel button on the actuator for at least 4 seconds for teaching.
For matching more additional camera, select Channel 3 or 4 by pressing Channel button ( 27 ) of the Intercom.
When Channel button is pressed once, it will change to next channel.
Hold down the volume or the channel button for 3 to 5 seconds see Figure 2.
Press the Channel button 26 to display the outdoor temperature of each outdoor sensor.
Press and hold down the Channel button 26 to remove unused channels.
Press the Channel button 26 4 x to display all the channels one after the other in a loop.
Upon activation of previous channel button 263, a tuner may tune to a previously tuned channel.
Preset channel button ( 1 ~ 8 ) Use these when presetting and recalling stations.
Press the ChannEl button ( B9 ) to scroll between each sensor channel.
Select the channel button CH1 ~ 8 that corresponds to the PTZ Camera Connection and Setup.
Press the channel button 26 for approx . 3 seconds until a signal is sounded.
Press Channel button ( ↑ ) on the handset to set Security Code.
You'll also be interested in:
Examples of using Button
Show more
Humid steam button depending on the model
You are in a danger of loosing this button here
Press the button to access this function
Examples of using Channel
Show more
A list of channel types appears on the display
Steer for the centre of the channel
Press on the desired channel to take a snapshot
