Examples of 'channel response' in a sentence
Meaning of "channel response"
channel response - in marketing, it refers to the feedback or reactions received through different communication channels from customers or target audience
How to use "channel response" in a sentence
Basic
Advanced
channel response
A channel response of the received signals is estimated.
The channel estimate may be given by a channel response vector h ju.
This channel response may also vary with time.
Envelope of the channel response.
Channel response taps are comprised of real and imaginary components.
Each transmitted data signal experiences a similar channel response.
It is assumed that the channel response should be constant over a subframe period.
This may be suitable if the voice communication channel response is time invariant.
The channel response may be estimated according to any of a variety of conventional techniques.
Interpolation can be used to estimate the channel response on the remaining subcarriers.
The common channel response for the received combined signal is estimated.
A block column of a combined channel correlation matrix is determined using the combined channel response matrix.
H x is an effective channel response matrix observed by the data vector s for mode x.
The code block diagonal matrix is combined with the channel response block diagonal matrix.
The channel response of subcarriers bearing the reference symbols can be computed directly.
See also
Crosstalk can be reduced when channel response and spreading codes are known.
The channel response estimates are for the subbands used for data transmission.
The receiving entity derives a spatial filter matrix based on the effective channel response matrix.
The downlink channel response may thus be correlated with the uplink channel response.
SUD is typically utilized when all communications experience a same channel response.
The receiver compensates for the channel response and coherently combines the received multipath signal components.
Figure 3 is a graphic illustration of a joint channel response.
EPMATHMARKEREP is the channel response of the k th user.
The channel response matrix is the collection of the individual channel responses EPMATHMARKEREP.
The matrix P is the outer product of the channel response vector h i for transmit antenna i.
The channel response values are divided into a real portion CRR and an imaginary portion CRI.
Receivers used for OFDM demodulation essentially use the channel response calculated from reference pilots.
The transmit channel response is then given by EPMATHMARKEREP.
During transmission, each communication experiences a channel response.
The envelope of the channel response will therefore be Rayleigh distributed.
In general terms, these are referred to as complex channel response.
EPMATHMARKEREP Hs is the channel response matrix corresponding to the segment.
Amplitude and phase distortion, which cause time dispersion, are known as channel response.
AUX channel response is adjustable using an EXPO or Custom curves.
Estimate frequency offset and channel response for each detected cell ; and.
The channel response that ultimately affects the quality of services can, however, be estimated.
Specifically, the channel obtaining manner is generally obtained based on a long-term channel response.
Estimating a channel response of the received signals ;.
Combining the code block diagonal matrix and the channel response block diagonal matrix ;.
H is the channel response matrix . d is the spread data vector.
Figure 1C is a simplified diagram of channel response matrix scaling.
Estimating a channel response for each of the data signals ;.
Figure 5 is a graphic illustration of an interleaved joint channel response similar to Figure 3.
The more the channel response is spread, the more efficient is the filtering.
A similar rearrangement is performed on the channel response matrix, as shown in Equation 5a.
If the channel response has a large delay spread, then a dose spacing may be necessary.
Figure 6 is a graphic illustration of a realistic channel response for a WG4 propagation channel.
A channel response matrix H ^ is estimated by the receiver from a reference signal transmitted by the transmitter.
Means for estimating a channel response for each of the data signals ;.
Therefore, CDD schemes increase the frequency selectivity of the channel response.
You'll also be interested in:
Examples of using Response
Show more
Method of measuring the response time on vehicles
His response to persons in distress was similarly appropriate
We can expect a quick response if he hears that
Examples of using Channel
Show more
A list of channel types appears on the display
Steer for the centre of the channel
Press on the desired channel to take a snapshot
