Examples of 'charging efficiency' in a sentence
Meaning of "charging efficiency"
Charging Efficiency: The ability of a system or device to effectively convert energy from a power source into stored energy, often measured as a percentage of the input energy that is successfully stored
How to use "charging efficiency" in a sentence
Basic
Advanced
charging efficiency
Low charging efficiency due to external cause.
Stable output and high charging efficiency.
A charging efficiency under this circumstance is relatively low.
Different seasons will affect charging efficiency.
The charging efficiency can differ compared to charging from the usual mains power supply.
It is very inconvenient and the charging efficiency is slow.
Good charging efficiency may be observed for the WIC.
This part is the key to determine the charging efficiency.
Significant advances in initial charging efficiency as a result of etching have been obtained.
Additives were included to minimise hydrogen evolution and enhance charging efficiency.
Much lower than standard so the charging efficiency is lower accordingly.
This will help preserve the life of the battery and maximize charging efficiency.
Poor charging efficiency would be observed for WIC.
It is not good at the solar energy efficiency and charging efficiency.
As a result, the charging efficiency of air into the combustion chamber 4 is increased.
See also
Because the charging gap is large, the charging efficiency will be low.
At this point, the charging efficiency with the added charge-improving compound may be determined.
Thus, the efficiency of the engine is directly related to its charging efficiency.
Following formation, we determined the charging efficiency and the rate capability of the iron electrodes.
However, different mobile phones and wireless chargers are actually different in charging efficiency.
The boost charge function, solve the low charging efficiency problem of low wind.
The charging efficiency of lead acid battery is quite low - only 70 per cent.
Stable current output, can be used as data output, charging efficiency is greatly improved.
This value of charging efficiency was considerably higher than that of the commercial electrode at 70 %.
Accordingly, the charging time can be reduced and the charging efficiency can be improved.
The charging efficiency is calculated as follows, EPMATHMARKEREP wherein,.
In practice the cells will exhibit a non-perfect charging efficiency extending the charge period.
Increases charging efficiency to more than 80 %, more energy saving than traditional UPS.
These batteries use iron electrodes with a charging efficiency of 70 %.
Charging efficiency as a function of cycling at C/2 rate of charge and C/20 rate of discharge.
FIG . 4 represents a curve of the total charging efficiency according to the charged capacity.
Consequently, the charging cost is high, and the charging efficiency is low.
Figure 4 shows that the high charging efficiency was retained over at least 25 cycles.
With - DV control technology, the charging efficiency is higher.
You'll also be interested in:
Examples of using Charging
Show more
But you are not charging the enemy
Charging cable adapter with alligator clamps
Do not store headset or charging in extreme environments
Examples of using Efficiency
Show more
Improve the energy efficiency of a shopping centre
Efficiency and emissions requirements of combustion equipment
Liberalisation enhances efficiency of local insurance market
