Examples of 'check and tighten' in a sentence
Meaning of "check and tighten"
Check and tighten: To review and adjust something for accuracy, security, or effectiveness
How to use "check and tighten" in a sentence
Basic
Advanced
check and tighten
Check and tighten all engine screws.
Transmitter antenna loose check and tighten.
Check and tighten all gas connections.
Use suitable tools to check and tighten fasteners.
Check and tighten all wiring wires at p.
Loose or faulty connection Check and tighten all wire connections.
Check and tighten all terminals as required.
The frame has become loose Check and tighten all nuts and screws.
Check and tighten the fan belt.
Loose nut / screw Check and tighten all nuts and screws.
Check and tighten all cable connections.
Increase post-gas duration Check and tighten all gas connections.
Check and tighten the brackets as appropriate.
DISCONNECT POWER ; check and tighten all wiring.
Check and tighten wire connection.
See also
At least once every 25 working hours, check and tighten all the fixing screws and nuts.
Check and tighten all bolts.
After a 5 hour running-in period, change the oil and check and tighten all screws and nuts.
Periodically check and tighten hardware as necessary.
Check and tighten each fastener.
To avoid injury, check and tighten the blade bolt periodically.
Check and tighten gas fittings.
DISCONNECT POWER ; check and tighten disconnected, or wired incorrectly all wiring.
Check and tighten all terminals.
Periodically check and tighten all nuts, bolts, and screws.
Check and tighten all wiring.
It is recommended you check and tighten the band, if necessary, with a wrench.
Check and tighten all water pipes and.
Leak Check and tighten all connections.
Check and tighten support fasteners x.
Check and tighten blade and hub fasteners x.
Check and tighten fluid needle packing nut.
Check and tighten or replace cabling.
Check and tighten the cable.
Check and tighten hardware occasionally.
Check and tighten all bolts do not over tighten.
Check and tighten all the parts on your unit every three months.
Check and tighten all bolts and nuts before operating the log splitter.
Check and tighten the speaker cables at the main amplifier and the speakers.
Check and tighten all hardware and QR levers to fastener torque specifications table.
Check and tighten if necessary, before each use.
Check and tighten screws, nuts and bolts.
Check and tighten all electrical connections, including the ground.
Check and tighten hose connections . y Unclog drain pipe.
Check and tighten all bolts After first 8 hours and.
Check and tighten all terminals / delay module / timer.
Check and tighten all bolts Every 100 operating hours Do not overtighten.
Check and tighten all bolts, fittings, etc.
Check and tighten all bolts, fittings, etc ., before operating compressor.
You'll also be interested in:
Examples of using Check
Show more
I am gonna check on the condition of the survivors
Search for the sensor or check batteries
I will go check on the undercover butter agenda
Examples of using Tighten
Show more
Tighten the screw through the clips
I will just tighten these up for you
Tighten properly the connection block screws
