Examples of 'chimney must' in a sentence
Meaning of "chimney must"
This phrase suggests that a chimney is necessary or required for a specific purpose. It implies that the presence of a chimney is essential for proper ventilation or the functioning of a fireplace or heating system
How to use "chimney must" in a sentence
Basic
Advanced
chimney must
Connection to the chimney must be performed in accordance.
Chimney must be a type suitable for solid.
I think the chimney must be blocked.
The chimney must be cleaned and in good working order and constructed of noncombustible materials.
Gases that exit on chimney must be transparent or white.
The chimney must be connected in accordance with the installation instructions of the chimney supplier.
The cross section of the chimney must be at least that of.
The chimney must not draw in extra air.
The stove the whole system including the chimney must be cleaned more fre.
The chimney must be swept to remove the soot.
The cross-section of the chimney must be at least equal to.
The chimney must also be swept regularly by the chimney.
But a good, proper chimney must do more than that.
The chimney must also be regularly cleaned by the chimney.
If deterioration is discovered, the chimney must be repaired or the vent replaced ;.
See also
The chimney must be a type suitable for solid fuel.
Before starting the installation, the masonry chimney must be inspected by a qualified sweep.
The chimney must be at least three feet higher than.
To prevent the risk of chimney fires, the chimney must be cleaned every year.
The existing chimney must be comprised of one of the following.
The underpressure in the chimney must be at least 12.
The chimney must be a type.
Anyone working on the chimney must also be carefully monitored.
The chimney must have either a clay liner or a listed stainless steel liner.
The cross-section of the chimney must be designed to fit the fireplace.
The chimney must be built in accordance with the current building code.
The connection for attaching to the chimney must be able to withstand at least 400 C.
The chimney must be equipped with an easily accessible soot door.
The delivery pressure of the chimney must not be less than 0.12 mbar.
The chimney must be absolutely clear of any soot residue or creosote.
Connection to the chimney must be carried out in accordance.
The chimney must be properly lined and sized per local or national codes.
The fireplace and chimney must be in an enclosure up to the attic.
The chimney must also be of a sufficient mechanical strength for the mass to be lifted.
The cross-section of the chimney must be at least that of the flue pipe.
The chimney must be tall enough to provide a proper draught and prevent smoke problems.
Connection to a masonry chimney must be by a metal or masonry thimble cemented in place.
The chimney must be installed in accordance with the manufacturer 's instructions.
Connection to the chimney must be made using strong and stable pipes.
The chimney must be refitted, possibly install a smoke suction device.
Your chimney connector and chimney must have the same diameter as the appliance 's exhaust outlet.
The chimney must be attached to the body of the rangehood, as indicated in FIGURE 12.
Any accessible chimney must be fenced off or finished to prevent contact.
The chimney must be at least 4 metres high.
Smoke pipe and chimney must always be suitable for a stove connection.
The chimney must have location brackets - see below.
The weight of the chimney must be calculated based on its dimensions and height.
The flue or chimney must bemade of fire-resistant material, preferably ceramics or stainless steel.
The flue or chimney must be airtight and wellcleaned and guarantee sufficient draught.
The masonry chimney must be built with bricks and mortar conformed to the building code.
