Examples of 'choke control' in a sentence
Meaning of "choke control"
refers to a device or mechanism used to regulate or restrict the flow of air or fluid in a system, typically found in engines or hydraulic systems
How to use "choke control" in a sentence
Basic
Advanced
choke control
The choke control is located on the engine.
Check to be sure choke adjusting screw is contacting choke control lever.
Turn the choke control straight up.
Do NOT operate this unit with the Choke control activated.
Pull out the choke control knob to operate it.
Never try to shut the engine down using the Choke Control Knob.
Pull out the choke control if engine is cold.
Starting warm engine - do not touch the choke control.
Set the choke control in the choke position.
For a warm engine start attempt the choke control may not be needed.
The choke control is over the clutch lever.
Starting warm engine - the choke control should be pressed in.
Use choke control whenever you are starting a cold engine.
Then slowly move the choke control to the run position.
The choke control has been preset at the factory and adjustment should not be necessary.
See also
If engine fires but does not start, move choke control.
Throttle and choke control if equipped.
Choke control must be moved to ON position when starting a cold engine.
When engine starts, slowly push choke control in until.
Make sure the choke control knob is properly installed.
Starting cold engine - pull the choke control out fully.
Move the choke control lever to the choke position.
When the engine starts, return choke control to run position.
Pull the choke control to activate the choke on the engine.
After the engine starts, deactivate the choke control and.
Set the choke control in the choke position by pull the choke control outwards.
As the motor warms up, move the choke control lever to the run position.
Choke control must be pulled out to ON position when starting a cold engine.
If engine fires but does not start, move choke control to half choke position.
The throttle and choke control levers are provided with holes for optional cable attachment.
If engine still does not start, pull the choke control out and retry.
Activating the choke control closes the choke plate on carburetor and aids in starting engine.
Moving the throttle lever all the way forward activates the engine 's choke control.
Move the choke control to the Off position.
As the engine warms, slowly rotate the choke control to RUN position.
Gradually return choke control to OFF position after engine starts and warms up.
After the engine starts, release the ignition key, and move the choke control to OFF.
Do NOT leave the choke control on while operating the tractor.
As engine warms up, and RPM stabilizes, gradually push choke control to OFF position.
Move choke control lever to CHOKE position.
As engine warms up, and RPM stabilizes, gradually move choke control to OFF position.
Move choke control to RUN position.
As the engine warms up, move the choke control ( C ) to the run position.
Place choke control into ON position.
As the engine warms up, move the choke control ( B ) to the run position.
The Choke Control Knob opens and closes the choke valve in the carburetor.
Some engine applications use a remote-mounted choke control rather than the engine-mounted choke lever shown here.
If choke control is remote, push bell crank either way until it just touches washer.
When engine starts, move choke control gradually toward the RUN position.
Choke control knob ; Device for enriching the fuel / air.
You'll also be interested in:
Examples of using Choke
Show more
Do not choke the carburetor to stop engine
Line current with choke from catalogue
Choke your own self if you want
