Examples of 'choke position' in a sentence
Meaning of "choke position"
choke position: In various contexts, choke position refers to a strategic or advantageous position where one has control or dominance over another. It can be used metaphorically in sports, military, or competitive settings, implying a position that limits or suppresses the opponent's options or capabilities
How to use "choke position" in a sentence
Basic
Advanced
choke position
Move up the combination switch choke position.
The choke position is located at the front of the groove.
Set the throttle control in the choke position.
Choke position for starting may vary depending upon temperature and other factors.
Set choke lever to no choke position.
Disengage the choke position with the throttle control when the engine is warm.
Move the choke lever up to the full choke position.
Set the choke control in the choke position by pull the choke control outwards.
Move the choke control lever to the choke position.
The closed choke position enriches the fuel mixture for starting a cold engine.
These fighters are not gonna be in the optimal choke position much longer.
In the optimal choke position much longer . These fighters are not gonna be Holding.
For hot engine starts make sure choke lever is in the choke position.
Choke position for “ warm start and working ”.
Move the automatic choke C to the choke position.
See also
It is not necessary to use the choke position when the engine is warm fig . 15.
Starting cold engine - put the throttle control in the choke position.
Operating position, Choke position for " warm start and working.
Move the choke / run switch to the choke position.
Move choke lever to half choke position ( G ) and pull starter until engine runs.
The full throttle position is approximately 2 cm behind the choke position.
Set the throttle lever ( 1 ) to the Choke position when the engine is cold.
Move the throttle / choke control into the full choke position.
Choke position for “ cold start ”.
Move choke lever to half choke position C.
If engine fires but does not start, move choke control to half choke position.
Set the start / stop switch in the choke position by pulling the red control outward - upward . 56.
As the engine is beginning to die, move the choke lever to the choke position.
Move choke lever to half choke position D.
Move the choke control or throttle / choke control into the full choke position.
Put choke knob to No Choke position.
Move the choke lever ( if equipped ) all the way backward into the choke position.
Move choke lever to choke position B.
As described under ” Cold starting ”, except without putting the combination switch ( 6 ) in choke position.
Set choke lever to half choke position 30.
FAST IDLE, Combined choke / fast idle is received when the choke is moved to choke position.
Move red lever ( B ) to choke position.
Move the Throttle / Choke control lever, or Choke control knob, out of the choke position.
Move the choke control lever ( A ) to the choke position Figure 4.
Move the choke control ( C ), or the combination choke / throttle lever, to the choke position.
CHOKE, Set the choke control in the choke position.
Move the choke lever ( G ), or the combination choke / throttle lever, to the choke position.
Move choke lever ( E ) to half choke position.
Move the choke control ( C ) to the choke position.
Move the choke control lever ( B ) to the choke position.
Turn the choke control knob ( D ) to the choke position.
Turn the choke control knob ( J ) to the choke position.
You'll also be interested in:
Examples of using Position
Show more
Then position the unit as shown below
Verify the correct position of the gasket
Try to position cages out of direct sunlight
Examples of using Choke
Show more
Do not choke the carburetor to stop engine
Line current with choke from catalogue
Choke your own self if you want
