Examples of 'chuck jaws' in a sentence
Meaning of "chuck jaws"
This phrase is not commonly used in English and doesn't have a clear meaning. It might be a misspelling or a typo
How to use "chuck jaws" in a sentence
Basic
Advanced
chuck jaws
Open the chuck jaws as far as possible.
Turn chuck collar to open chuck jaws.
Open the chuck jaws wide enough to.
Remove drill bit from chuck jaws.
Open the chuck jaws fully.
Turn the sleeve counterclockwise to open the chuck jaws.
Open the chuck jaws entirely.
Do not use a wrench to tighten or loosen the chuck jaws.
Open chuck jaws and remove hex key.
Be sure the bit shank and chuck jaws are clean.
Do not use if chuck jaws or other parts are cracked or worn.
Turn the chuck collar to open the chuck jaws.
Tighten the chuck jaws securely on the bit.
Insert the drill bit between the chuck jaws.
Open the chuck jaws wide.
See also
Ensure drill bit is in the center of the chuck jaws.
Tighten the chuck jaws on the drill bit.
Ensure that the drill bit is in the center of the chuck jaws.
Open chuck jaws using the provided chuck key.
Rotate the chuck body to close and tighten the chuck jaws.
Clean the speed chuck jaws with a wire brush.
Make sure to insert the drill bit straight into the chuck jaws.
Open the chuck jaws wide enough to insert a bit.
Be sure that the shank of the bit and the chuck jaws are clean.
Open or close the chuck jaws to a point where the.
The drill has a keyless chuck to tighten or release drill bits in the chuck jaws.
Open the chuck jaws and remove the hex key.
Rotate the chuck counterclockwise to tighten the chuck jaws securely on the bit.
Loosen the chuck jaws using the chuck key provided.
Do not start the tool until the bit is securely clamped in the chuck jaws.
Open the chuck jaws as wide as possible to gain access to the chuck.
Do not insert the drill bit into the chuck jaws at an angle then tighten.
Open the chuck jaws as far as possible using the chuck key.
Insert drill into chuck far enough to obtain maximum gripping of the chuck jaws.
Open the chuck jaws by turning collar by hand and insert the.
Hold the tool firmly and turn the sleeve counterclockwise to open the chuck jaws.
Open the chuck jaws by turning collar with fingers and insert bit.
Insert the hex key into the chuck and tighten the chuck jaws securely.
Make sure the chuck jaws grasp the flat sides of a screwdriver bit.
Hold the ring and turn the sleeve counter clockwise to open the chuck jaws.
These chuck jaws move on a radial line so as to retain a circular member for spinning.
Center the drill bit in the chuck jaws before final tightening of the chuck.
The lifting process involves lifting the first temporary setting part with the first chuck jaws.
Tighten all three chuck jaws to secure the drill bit sufficiently to prevent slipping.
Dismounting the chuck Open the chuck jaws completely.
Tighten the Chuck Jaws by rotating the Chuck clockwise.
Rotate chuck body in the direction of the arrow marked UNLOCK to loosen chuck jaws.
Place the drill bit or accessory into the Chuck Jaws correctly centralised.
Ring Hold the ring and turn the sleeve counterclockwise to open the chuck jaws.
Drill not aligned in the Chuck Jaws correctly.
You'll also be interested in:
Examples of using Chuck
Show more
Chuck had a japanese stewardess over today
To ensure that the chuck is securely fitted
Chuck wanted to see the studio again
Examples of using Jaws
Show more
Replace the jaws before continuing use
Jaws powerful enough to crush bones to oatmeal
He opens his jaws and fights her
