Examples of 'chuck key' in a sentence
Meaning of "chuck key"
A chuck key is a tool used to tighten or loosen the chuck of a drill or other similar equipment. It is typically a small, T-shaped metal tool with gear-like teeth that engage with the chuck's teeth to secure or release the drill bit
Show more definitions
- A wrench-like device used to tighten or loosen a chuck.
How to use "chuck key" in a sentence
Basic
Advanced
chuck key
Insert the chuck key and twist counterclockwise.
An insert tool can be clamped or releasedwithout a chuck key.
Strike the chuck key with a hammer as shown.
Without the use of a chuck key.
The original chuck key appears to have been preserved.
The drill is supplied complete with chuck key.
The chuck key can be thrown out at a high speed.
An insert tool can be clamped or released without a chuck key.
Use the chuck key to open and close the chuck.
Open chuck jaws using the provided chuck key.
The chuck key should always be kept in the holder provided.
Insert twist drill and tighten with chuck key.
Push ends of chuck key handle through two holes in end of.
Never run the machine with the chuck key.
Put the chuck key into each hole in the side of.
See also
Loosen the chuck jaws using the chuck key provided.
The chuck key should always be stored in the key holder.
Lock the drill bit in place with the chuck key.
Remove the chuck key or dowel pins before turning the machine on.
Open the chuck jaws as far as possible using the chuck key.
Insert the chuck key or a chuck remover bar in one of the keyholes.
Tighten the drill chuck only with the chuck key provided.
Place chuck key in any one of the three holes in the chuck.
You may also use the drill chuck key to tighten the clamp.
Chuck key in anticlockwise direction until the drilling tool can be removed.
Always remove the chuck key from the chuck after each use.
Secure the insert tool in the chuck by turning the chuck key clockwise.
Place the chuck key in each of the three holes and tighten clockwise.
Open the geared chuck with the chuck key and remove tool.
Insert the chuck key into one of the three chuck key holes.
Now at each drill hole tighten the chuck evenly with the chuck key.
Use the chuck key supplied for opening and closing the chuck.
Never use a wrench or means other than a chuck key to tighten or loosen the chuck.
Insert the chuck key in one of the three holes provided on the chuck.
RISk OF FLYINg OBJECTS do not tether the chuck key to the tool.
Turn the chuck key clockwise to tighten the jaws around the drill bit.
Chuck adapter y Drill chuck u Chuck key i Soft jaws o Wrench p Screw.
Turn the chuck key clockwise to tighten the jaws and securely grip the drill bit.
To open the chuck jaws, place the chuck key.
Always remove the chuck key from the chuck before attaching the air supply.
In the event that tools are stuck, use the drill chuck key.
Insert the chuck key into one of the three holes above the geared rim.
Insert the tool and tighten evenly with chuck key in all three 3 holes.
REMOVE ThE ChUCk kEY BEFORE STARTINg ThE MAChINE.
To remove the chuck, open the jaws of the chuck with the chuck key.
To remove, hold the chuck key holder and then take it out.
Insert the accessory and tighten all 3 bores equally with the chuck key.
Turn chuck key counterclockwise to open chuck jaws, place bit in chuck.
To close the jaws rotate the chuck key clockwise, to open the jaws rotate.
Tighten the chuck jaws securely on the drill bit, using the chuck key provided.
You'll also be interested in:
Examples of using Chuck
Show more
Chuck had a japanese stewardess over today
To ensure that the chuck is securely fitted
Chuck wanted to see the studio again
Examples of using Key
Show more
Activate the keypad using the key
The key developments may be summarized as follows
Stability is another key element in quality of life
