Examples of 'circuit protector' in a sentence
Meaning of "circuit protector"
circuit protector: A circuit protector is a device or component designed to automatically interrupt or shut off an electrical circuit in the event of an overcurrent, short circuit, or other electrical fault. It is used to protect electrical equipment and prevent damage or fire
How to use "circuit protector" in a sentence
Basic
Advanced
circuit protector
Dc circuit protector charging cable sold separately.
Then connect the alternating current circuit protector.
Push the circuit protector button to reset.
Preferably each output port comprises a corresponding open circuit protector.
The circuit protector protects the battery charging circuit.
Reduce the electric load on the circuit if the circuit protector trips.
Use of a ground fault circuit protector reduces the risk of electric shock.
The receptacles are protected by an AC circuit protector.
The circuit protector may be reset by pushing the button of the protector.
An overload DC circuit will trip the DC circuit protector push button comes out.
A DC circuit protector has been provided to protect the circuit from overloads.
If an overload occurs, the circuit protector will trip.
Circuit protector is in open position - check fuse or.
If overloading causes the circuit protector to trip, reduce the load.
The circuit protector does not preventover-charginga battery.
See also
If this happens, wait a few minutes before pushing in the circuit protector to resume operation.
The other end of the circuit protector is connected to the battery positive terminal.
A short circuit, or a battery connected with reverse polarity, will trip the circuit protector.
Push the DC circuit protector to the ON position.
If any lights, accessories, or controls dont work, inspect the appropriate circuit protector.
Turn the AC circuit protector to the ON position.
To use this equipment again, press DC circuit protector ( X ) button.
The circuit protector does not prevent over-charging a battery.
To use this equipment again, press DC circuit protector ( F ) button.
Circuit protector is in open position - check fuse or miniature circuit.
NOTE, Continuous tripping of the circuit protector may cause damage to generator or equipment.
One of those light emitters 29 indicates when the circuit protector 10 is tripped.
Turn the AC circuit protector ON see page.
Before starting to charge battery, ensure DC circuit protector ( E ) is in RESET position.
Is the DC circuit protector in the ON position?
Before starting to charge battery, ensure DC circuit protector ( F ) is in RESET position.
You'll also be interested in:
Examples of using Protector
Show more
If the overload protector is fitted on the brake
Protector for cord cutterNylon cutting head
Remove the protector caps and plugs
Examples of using Circuit
Show more
Each electrical circuit corresponds to a track block
Circuit breaker has tripped due to an overload
A household fuse or circuit breaker has tripped
