Examples of 'circuit under test' in a sentence
Meaning of "circuit under test"
The term 'circuit under test' is commonly used in electronics to refer to a specific circuit or component that is being tested or evaluated for its functionality and performance
How to use "circuit under test" in a sentence
Basic
Advanced
circuit under test
A poor connection to the circuit under test.
Turn off the circuit under test and discharge all capacitors before disconnecting the test leads.
Adversely loading the circuit under test.
Do not touch the circuit under test if no measurement is being taken ;.
Turn off power to the circuit under test.
The circuit under test must be completely d e - e n e rg i s e d and i s o l a t e d b e f o re test connections are made.
Connect test leads into circuit under test.
Be sure that the circuit under test has all power removed.
In addition they alter the circuit under test.
For voltage measurements, the circuit under test must be protected by a 20A fuse or circuit breaker.
Remove test probes from the circuit under test.
Turn off the power to the circuit under test before cutting, unsoldering or breaking it.
Touch the test leads to the circuit under test.
Turn off the power to the circuit under test before uniting, unsoldering or breaking it.
Connect the test leads to the circuit under test.
See also
Any meter will load the circuit under test to some extent.
Transformer jaw tips are designed not to short the circuit under test.
Connect the probes to the circuit under test and take the reading.
Touch the test probe tips in parallel to the circuit under test.
After an insulation test, the circuit under test will be discharged automatically.
Doing so can blow the fuse or damage the circuit under test.
Climatic enclosure for subjecting the circuit under test to a schedule of thermo-mechanical or vibration stresses ;.
Connect the test probe tips to the circuit under test.
Remove power from the circuit under test and then.
Do not perform measurements with test leads connected to the circuit under test.
Disconnect the test leads form the circuit under test before rotating the range.
This instruction is common to all of the functional pins of the circuit under test.
The buzzer sounds if the resistance of a circuit under test is less than 50Ω.
Connect all four black ground leads to the ground of the circuit under test.
Should be tightly coupled to the circuit under test ( 0 % chose this ).
Before fuse replacement, disconnect all test leads and / or ant connectors from any circuit under test.
Connect the test probes to the circuit under test.
To replace batteries switch off instrument and disconnect test leads from the circuit under test.
Clamp tips are designed not to short the circuit under test.
Before rotating the selector switch, disconnect the test leads from the circuit under test.
Touch the test lead probes to the circuit under test.
Before changing functions, disconnect the test leads from the circuit under test.
AC, Connect the test leads to the circuit under test.
Before battery replacement, disconnect all test leads and / or ant connectors from any circuit under test.
A low-stability oscillator used to inject a signal into a circuit under test ( 0 % chose this ).
You'll also be interested in:
Examples of using Test
Show more
Mechanical tensile test prehoistable navigation lights
A test with tripping is compulsory on installation startup
Before the test we had art class
Examples of using Circuit
Show more
Each electrical circuit corresponds to a track block
Circuit breaker has tripped due to an overload
A household fuse or circuit breaker has tripped
