Examples of 'circuit uses' in a sentence
Meaning of "circuit uses"
circuit uses - the utilization of electrical circuits in technology or machinery
How to use "circuit uses" in a sentence
Basic
Advanced
circuit uses
Internal circuit uses opto coupler.
Preferably, the digital signal processing circuit uses CMOS logic.
Another type of circuit uses operational transconductance amplifiers.
The circuit uses minimum resources.
For four iterations for example, the circuit uses eight modules, or elementary decoders.
The circuit uses two separate control systems.
Up to this point, the transmission circuit uses the components of a conventional circuit.
This circuit uses discharging of a capacitor into a neutral or earth conductor.
Because the unit 's internal water circuit uses copper piping, excessive corrosion may occur.
This circuit uses a transformer and an auxiliary bridge to control the amplifier.
In this example, the circuit uses an LC tank circuit.
This circuit uses the vacuum decay method of leak detection.
In this case the electric circuit uses cables and external mechanical elements as switches.
This circuit uses a cyclic linear code for the data transmission.
The orientation-sensing circuit uses a fusión of two differing sensor technologies.
See also
This circuit uses the software it stores to perform numerous analysis tasks.
Moreover, a short segment of the Circuit uses Missisquoi Nord forest trails, were bicycles are prohibited.
The circuit uses two integrated circuits from Maxim.
Specifically, the displacement-controlled circuit uses a distance sensor, measuring the travel made by the actuator.
The circuit uses only a small number of components, plus a battery.
Each secondary circuit uses a side outlet of the primary circuit as a heat source.
This circuit uses only low-pressure liquid and vapor refrigerant.
This very simple circuit uses a transformer, two diodes, a capacitor and an ammeter.
The circuit uses a new technology to restore the capacity of lead-acid batteries.
The comparator circuit uses a predefined reference voltage which is the current not to be exceeded.
The circuit uses a part of the larger circuit and a separate, purpose-built section.
Here, the circuit uses an LED instead of a buzzer.
The circuit uses an opamp-based differential amplifier to read the pulses from the coil.
The initial circuit uses a bi-filar coil wound on a ferrite ring or " toroid ".
The circuit uses one internal and-gate to detect each potential k-clique.
A 555 LED Flasher circuit uses an astable multivibrator which produces pulses for flashing the lamp.
This circuit uses a non-differential structure and is in MOS technology.
A feedback circuit uses the transformer to synchronize the opening and closing of the transistors.
A stripline circuit uses a flat strip of metal which is sandwiched between two parallel ground planes.
The command circuit uses following input signals which are measured at the following measurement 's points,.
The second circuit uses a technique derastreamento the maximum power point, implemented by a commercial integrated circuit.
This circuit uses correction data and color converting data from a memory 141.
This circuit uses a high-resolution Delta Sigma capacitance / digital converter.
This circuit uses timer 555 as a level detector.
This circuit uses substrate static-protection diodes 114 in a CMOS chip coupled to the keyboard 61.
You'll also be interested in:
Examples of using Uses
Show more
Of these uses oratory may serve as an illustration
White flour only uses the endosperm
Current uses of funds related to the embargo
Examples of using Circuit
Show more
Each electrical circuit corresponds to a track block
Circuit breaker has tripped due to an overload
A household fuse or circuit breaker has tripped
