Examples of 'circumferential speed' in a sentence
Meaning of "circumferential speed"
circumferential speed - This phrase describes the velocity or rate at which an object moves around a circular path or boundary
How to use "circumferential speed" in a sentence
Basic
Advanced
circumferential speed
Is the circumferential speed of the rolls of the first stand.
Measurements inside a fast rotating rotor are very complicated due to the high circumferential speed.
Preferably this circumferential speed is kept constant during the complete formation of the bead.
All of the wheels move the logs along the path at the same circumferential speed.
The surface speed concerns the circumferential speed of the transport rollers and the embossing rollers.
In both cases, the important point is the value of the circumferential speed.
The circumferential speed of the transport rollers is indicated as VR.
With the increasing diameter, the circumferential speed increases.
The max . circumferential speed of the dry grinding wheel is.
A corresponding centrifugal acceleration results from the circumferential speed of the grinding bodies 33.
It rotates at a circumferential speed which is substantially half the speed of the heads 10.
The roller 20 rotates with a certain circumferential speed.
The circumferential speed of the grinder was 10 m per second.
Therefore, observe the permissible rotational / circumferential speed on the label of the diamond cup wheel.
The circumferential speed of the grinder was 10 metres per second.
See also
The process of claim 3 or 4, in which the circumferential speed of each roller is changeable.
The circumferential speed of the grinder is 10 meters per second.
The receiving surface ( 2 ) rotates at a circumferential speed which is monitored and designated as V 2.
The circumferential speed of the grinder is 10 metres per second.
The copper ring is rotated at a circumferential speed of 100 km / hour.
The circumferential speed of the crusher is 10 meters per second.
The lower doffer cylinder 11 b was driven at a circumferential speed of about 50 m / min.
Circumferential speed of tube 12 Rated speed of rotor.
This corresponds to a relative circumferential speed between sleeve and laser beam of 52.4 mm / s.
Circumferential speed of tube 13 Power factor 28 Serial number.
However, the third roller 67 is driven at a higher circumferential speed than the second roller 66.
The circumferential speed of the mill was 10 m / sec.
During operation the rollers 49 and 52 have the same circumferential speed as the rollers 6 and 9.
The circumferential speed of the mill is 10 m / sec.
Insulation class and IP rating 10 Power factor 24 Circumferential speed of drum tube 1.
The grinder 's circumferential speed was 10 meters per second.
The circumferential speed of the grinder was 10 meters / second.
The circumferential speed of the grinder was 10 m / s.
The circumferential speed of the magnetic brush is 100 mm / sec.
You'll also be interested in:
Examples of using Circumferential
Show more
Openings located near a circumferential or longitudinal welding
The circumferential spacing may be constant or variable
Its average speed in a circumferential direction increases
Examples of using Speed
Show more
The speed of the vacuum source shall be
I must have hit speed dial by mistake
Zoom speed is determined by the amount of rotation
