Examples of 'clean and grease' in a sentence
Meaning of "clean and grease"
Clean and grease - To remove dirt and oil and then apply a lubricant to a mechanical or automotive part to ensure proper functioning. This phrase is commonly used in the context of maintaining machines or vehicles
How to use "clean and grease" in a sentence
Basic
Advanced
clean and grease
Clean and grease sliding surfaces regularly.
My last advice would be that you should clean and grease your shoes regularly.
Clean and grease the chisel shank.
Here are some additional tips to keep oily hair clean and grease free,.
Clean and grease the tool shank.
Verarbeitungshinweise Surfaces must be flat, clean and grease free.
Clean and grease the bit shank.
Drive is running hard Check drive, clean and grease the shaft.
Clean and grease the bit or chisel shank.
Isolate Pump, turn power off, clean and grease O rings or replace if necessary.
Clean and grease the height adjustment threads.
Fitting an accessory ( fig . B ) u Clean and grease the shank.
Clean and grease the shank of the bit.
If required, clean and grease the axial bearing.
Clean and grease the insertion end of the tool.
See also
Continue with step 2 Clean and grease all threads each time you open the housing.
Clean and grease the shank end of the tool.
Thoroughly clean and grease only the central part of the pin.
Clean and grease steering head bearings and dust cover.
You must clean and grease the moving parts of the keys.
Clean and grease steering head bearings and gasket elements.
Cooling, clean and grease the shaft Model is difficult to control.
Clean and grease all threads each time you open the housing.
IMPORTANT, - Dust, clean and grease the crank shell 's bearing faces using the recommended grease.
Clean and grease contact surface between wedge and jaws with high quality grease Molykote.
To clean and grease the spring stacks, follow this procedure.
To clean and grease bushings and double seal, do the following.
Clean and grease the SDS-plus shank of the chuck adapter.
Clean and grease the shank of the accessory, before placing it into the socket!
Clean and grease the lawn mower carefully as described above under “ Lubrication ”.
Clean and grease the O-ring and threads before replacing the front end cap.
X Clean and grease the locks, wheels etc . with multi-function oil.
Clean and grease O-ring and cylinder.
Clean and grease drive gears every two years See Figure 20.
Clean and grease driveshaft splines - refer to Cleaning Driveline Splined Shaft, page 179.
You'll also be interested in:
Examples of using Clean
Show more
Do not clean the engine with water
Let me get you something to clean that up
It is in clean contrast to the oath they swear to us
