Examples of 'clean engine oil' in a sentence
Meaning of "clean engine oil"
clean engine oil: This phrase pertains to the process of removing dirt, contaminants, or impurities from the lubricant used in an engine
How to use "clean engine oil" in a sentence
Basic
Advanced
clean engine oil
Soak in clean engine oil until saturated.
Coat air filter in clean engine oil.
Of clean engine oil into the cylinder.
Soak air filter in clean engine oil.
With clean engine oil during assembly.
Lightlycoat foam elementwith clean engine oil.
With clean engine oil before assembly.
Then saturate it in clean engine oil.
Dip in clean engine oil and squeeze out excess oil.
Soak element in clean engine oil.
Apply clean engine oil to the new oil filter gasket.
Saturate foam element with clean engine oil.
Coat a film of clean engine oil on seal of new filter.
Soak the filter element in clean engine oil.
Soak element in clean engine oil and squeeze out excess oil.
See also
Coat gasket of new filter with clean engine oil.
Add a tablespoon of clean engine oil into spark plug hole.
Lightly coat foam element with clean engine oil.
Apply a light coating of clean engine oil to the gasket of the new filter.
Coat new oil fi lter seal with clean engine oil.
Dip the filter into clean engine oil and squeeze out excess.
Clean the oil filter support and coat oil filter seal with clean engine oil.
Apply clean engine oil or grease to cables and movable parts not specified.
Submerge the filter element in clean engine oil and squeeze out the excess oil.
Coat the new O-ring ( 4 ) on the new filter with clean engine oil.
Soak the element in clean engine oil and squeeze out the excess oil.
Remove the spark plug and pour about a tablespoon of clean engine oil into the cylinder.
Dip the element in clean engine oil and squeeze out the excess oil.
Remove spark plug and pour about one tablespoon of clean engine oil into the cylinder.
Apply a light film of clean engine oil to the rubber gasket on the oil filter.
Remove spark plug and pour approximately 1 oz. ( 30 ml ) of clean engine oil into the cylinder.
Pour a teaspoon ( 5 cc ) of clean engine oil into the cylinder to keep it from rusting.
Remove the spark plug and tip a spoonful of clean engine oil into the cylinder.
Coat a film of clean engine oil on the seal of the new filter, see figure 13.
Remove the spark plug and put a spoonful of clean engine oil into the cylinder.
Soak the air cleaner element in clean engine oil and squeeze out the excess oil.
Remove the spark plug and fill one teaspoon clean engine oil into the cylinder.
Soak the foam filter element in clean engine oil and squeeze out the excess oil.
Remove spark plug, pour one half ounce of clean engine oil into cylinder.
You'll also be interested in:
Examples of using Clean
Show more
Do not clean the engine with water
Let me get you something to clean that up
It is in clean contrast to the oath they swear to us
Examples of using Oil
Show more
Check oil level and fill if needed
Directions for observation with oil immersion
Use olive oil instead of grapeseed oil
Examples of using Engine
Show more
I started the engine and sped off
An engine shall be remapped prior to a test cycle if
Always stop the engine before unclogging
