Examples of 'clean the parts' in a sentence
Meaning of "clean the parts"
To remove dirt, dust, or any other undesirable substances from the individual components of an object or machine
How to use "clean the parts" in a sentence
Basic
Advanced
clean the parts
Fully clean the parts with water.
Disassemble the appliance and clean the parts after use.
Clean the parts by wiping with a damp cloth.
We recommend you clean the parts as de.
Clean the parts in warm water with soap.
Do not use abrasives to clean the parts of the unit.
Clean the parts with a soft wire brush.
Hearing amplifier and clean the parts using lukewarm water.
Clean the parts which are in contact with coffee.
The first step is to take your barbecue apart and clean the parts.
Do not clean the parts with a wire brush.
Once the Pump is disassembled you can clean the parts with warm water and soap.
Only clean the parts listed in this manual.
Afterwards, let everyting cool down and clean the parts again.
Fully clean the parts under running water.
See also
Check the following items, and adjust or clean the parts as needed.
Clean the parts and inspect their condition.
Now it is often sufficient to clean the parts with a high-pressure cleaner.
Clean the parts with a hairbrush and a dry cloth.
As a result, people should regularly clean the parts of the body where smegma occurs.
Clean the parts subject to accumulation of sawdust and chips.
Immediately after use, always clean the parts that have come into contact with.
Clean the parts as well.
Remove the accessories and the inner pot, and clean the parts with a mild cleaning agent.
Clean the parts after using them and occasionally.
Before first use, Thoroughly clean the parts that will come into contact with food.
Clean the parts to be peened.
How to Prepare the Unit before Inhalation - Clean the parts before starting the inhalation.
Clean the parts after each use to remove residual medication.
Tips, - Preferably clean the parts immediately.
Clean the parts of the unit regularly with a damp cloth.
Use a soft-bristle brush or sponge ( NOT a wire brush ) to carefully clean the parts.
It is best to clean the parts one after the other.
Clean the parts thoroughly with warm water and soap.
It is preferred to clean the parts in at least three baths of carbon dioxide.
Clean the parts with a mild detergent and a little warm water.
It is also possible to clean the parts and grease the piston prior to autoclaving.
Clean the parts with the cleaning brush in the appropriate cleaning solution.
If necessary, clean the parts with a damp cloth.
Clean the parts with a steel brush and roughen it with sand paper.
If necessary, clean the parts with a moist cloth.
Clean the parts subject to accumulation of sawdust and chips periodically with a dry brush.
Disassemble and then clean the parts before using them again see chapter “ Cleaning ”.
Clean the parts that have come into contact with food in hot water.
Thoroughly clean the parts that will come into contact with food.
Clean the parts with running water and then leave them to dry completely.
Thoroughly clean the parts that come into contact with food before.
Clean the parts and install new Gland Packing.
You can also clean the parts in the dishwasher on the top rack only.
Clean the parts thoroughly, particularly the bottle.
You'll also be interested in:
Examples of using Clean
Show more
Do not clean the engine with water
Let me get you something to clean that up
It is in clean contrast to the oath they swear to us
Examples of using Parts
Show more
Zero waste all parts of plant are used
All parts of the appliances can be replaced
Can not get parts for it now
