Examples of 'clearance hole' in a sentence
Meaning of "clearance hole"
clearance hole: In engineering and construction, this refers to a hole drilled or created to provide clearance for fasteners, bolts, or other components to pass through without interference
Show more definitions
- A hole through an object which is large enough to enable threads of a screw or bolt to pass through but not the head of the screw or bolt.
How to use "clearance hole" in a sentence
Basic
Advanced
clearance hole
The clearance hole is adapted to receive a threaded fastener.
Now we are going to drill the clearance hole.
Use center clearance hole on outer casing top for.
The lockout arm preferably has a clearance hole.
Clearance hole for bolts.
Each tab has an embossed diameter with a clearance hole through it.
Then provide a clearance hole in the back wall of the cabinet.
The distal end of the clip also is formed with a clearance hole or opening.
In some aspects, the clearance hole can be sized to receive the anchor.
Screw size Pilot hole diameter Clearance hole.
In one example, the clearance hole can range from 5mm wide to 9mm wide.
A first portion extending through a corresponding lateral clearance hole in said extension member ;.
The clearance hole 28 is adapted to receive threaded fastener 22.
The brake assembly comprises a locking plate 38 which defines a clearance hole through which the rod extends.
Bottom washer 96 has a clearance hole to accommodate sensing rod 86.
See also
The voltage plane has been provided with a etched clearance hole 37.
Each flange 38 comprises a clearance hole or through boring 39.
Figure 4 shows the female member 24 viewed along the axis of the clearance hole 50.
Screw size Pilot hole ø Pilot hole ø Clearance hole ( softwood ) hardwood.
A sliding sleeve 7 is provided, which has a clearance hole for screw 8.
Designed to pilot in the "medium" or "fine" clearance hole or in the core hole.
The rear bearing block 28 is provided with a clearance hole for a guide rod 61.
One end of the shaft 32 engages a blind clearance hole in the threaded nut 30.
You'll also be interested in:
Examples of using Hole
Show more
So does that giant hole in the wall there
The hole of the steam spout is clogged
Cut the piping hole sloped slightly
Examples of using Clearance
Show more
Clearance of the annual report on technical cooperation
I got special clearance through gate four
Clearance from countertop to unprotected overhead surface
