Examples of 'close the valve' in a sentence
Meaning of "close the valve"
To shut off the flow through a valve or stopper, typically in order to control or stop the movement of something, such as fluids or gases
How to use "close the valve" in a sentence
Basic
Advanced
close the valve
Close the valve on the source tank.
Keep the mouthpiece in or close the valve.
Close the valve on the gas cylinder.
No electricity is needed to open or close the valve.
Close the valve of the gas cylinder.
Continue to open and close the valve.
Prepare to close the valve on the refrigerant tank.
Valve knob clockwise to properly close the valve.
Close the valve at the propane gas tanks.
I can not to close the valve.
Close the valve and release the lever.
They should close the valve.
Close the valve on the water supply pipe.
Ray went to close the valve.
Close the valve when you.
See also
Stop and close the valve.
Close the valve to the house.
After frontloading the cannon close the valve.
Be sure to close the valve on the fuel tank.
Turn the valve switch anticlockwise to close the valve.
Close the valve to trap pressurized water in the system.
You might want to close the valve for a minute.
Close the valve back after pressure has been released.
The technicians tried to close the valve but did not succeed.
Close the valve again with the ventilation screw.
Turn the valve knob clockwise to properly close the valve.
Be sure to close the valve after draining the filter.
This provides an override option to open or close the valve if necessary.
Be sure to close the valve by twisting clockwise after draining.
One end of the plunger is biased to close the valve aperture.
Now close the valve.
It is not the purpose of the second process to close the valve.
Right to close the valve and to the left to open.
The sealing plug is configured to open or close the valve mouth.
Close the valve and press it into the air chamber.
The biasing means also close the valve after actuation is ended.
Close the valve on the rubber bulb by turning the screw clockwise.
Screw the cap back in reverse direction to close the valve again.
Open and close the valve once to released trapped air.
The core features a return spring which acts to close the valve.
Be sure to close the valve once the gasoline has drained.
Radial tension across the slit is relied on to close the valve member.
Anticlockwise to close the valve and end the heating process.
Ensure all gas connections are made and close the valve before the.
That will close the valve and the pump system.
Air pressure may also be used to close the valve stem or pin.
Open and close the valve several times to allow the water to.
Always replace the drain plug and close the valve after defrosting.
Close the valve when you are ready to use full power again.
Turn the petcock clockwise to close the valve when the cut is finished.
You'll also be interested in:
Examples of using Valve
Show more
Lift the valve assembly up and out
Grasp black lever on one drain valve
Check valve assembly caps to ensure tightness
Examples of using Close
Show more
Close enough to help me get safe away
Up three at the close of the dow yesterday
Close fireplace damper when not in use
