Examples of 'closing direction' in a sentence
Meaning of "closing direction"
This phrase is not commonly used in English. It does not have a specific meaning or context associated with it. Please provide more information or context to get a more accurate definition
How to use "closing direction" in a sentence
Basic
Advanced
closing direction
By briefly pressing the door in the closing direction.
In a closing direction the reference signal leads the motor signal.
Place a mechanical travel buffer in the closing direction.
The closing direction may also be another than a linear one.
Rotation of the sector in the closing direction is limited by a stop.
The closing direction for example is directed transversely to the engagement direction.
The diaphragm will be operated towards the closing direction.
The first closing direction may have any suitable relation to the second closing direction.
Receives the next command it will move in the closing direction.
Gas stop valve b Closing direction c Hexagonal wrench d Valve lid e Liquid stop valve a c b d d e.
This door can be automated both in the opening and in the closing direction.
Gas stop valve b Closing direction c Hexagonal wrench d Valve cap e Liquid stop valve.
This control valve has a valve closure which is spring loaded in a valve closing direction.
Gas stop valve b Closing direction c Hexagonal wrench d Valve lid e Liquid stop valve.
The rail 3 can subsequently also be moved in the closing direction.
See also
If the current closing direction is to be retained, continue with the next chapter.
A coil 4 applies pressure on the mobile element 5 in the closing direction of the first shutter.
If the closing direction was changed, the end positions must be set afterwards.
In all the figures, the curved arrow indicates the closing direction of the knife.
The closing direction and the cut-off mode are set via DIP switches see below.
Consider the case where the throttle grip 21 is operated in the throttle closing direction.
Used as a closing direction travel limit see wiring diagram fig.8.
When they are detached, the box member can be moved in the fastener closing direction.
In the closing direction gate leaf 2 moves first then gate leaf 1.
If foot-weighted metering is employed, the diaphragm will be operated towards the closing direction.
It pushes for approx . 2 seconds in closing direction before opening.
When the second transmission rod 35 retracts, then the opening-and-closing arm 32 rotates in the closing direction.
In each case, the closing direction may be reversed to cause the door 12 to open.
Conversely, when the air pressure decreases, the valve moves in the closing direction.
To move straight away in the closing direction release " TC " and press it again.
Conversely, the user may open the door after rotating the door in a door closing direction.
The valve member 32 is pushed in the closing direction by a compression spring 40.
The door mechanism is making its plugging movement inwards, i.e. in closing direction.
The spring 30b urges the valve shaft 12 in the closing direction vía the transmission member 47.
Once the end position „ UP “ is learned, the door is run automatically in closing direction.
Spring 52 now presses valve body 51 in the closing direction against valve seat 50 with a specifiable force.
It may also drive the main shutter 28 in the closing direction.
The cassette cover 15 is actuated toward a closing direction by a return spring 16.
After learning end position „ UP “, the door is run automatically in closing direction.
By turning the casing 9 in the closing direction of FIG.
Press the “ Step-by-step ” button again and check that the door moves in the closing direction.
The lever 72 is therefore free to pivot in the closing direction of the slide.
A biasing force created by biasing member 68 continuously biases spindle 10 in a valve closing direction " F ".
Also, the door 1 is urged towards the closing direction ( arrow mark A ).
Spring 52 loads valve body 51 with a force acting in the closing direction.
A valve closure member 25, preferably a steel ball, faces in closing direction valve seat 23.
Further, the air outlet 7 is closed by rotating the louver 10 in the closing direction.
Fig 3, End position menu active, cw closing direction.
The inside of the slider 60 applies the seal 14 upon activation in the closing direction.
Fig 2, End position menu is active, ccw closing direction.
You'll also be interested in:
Examples of using Closing
Show more
You are closing the store to play hockey
She remembers because the diner was closing
Pointing beyond the closing time of a checkpoint
Examples of using Direction
Show more
Direction indicators with apparent defects are disregarded
Always check the direction of rotation before
Direction of the chain movement and teeth
