Examples of 'closing force' in a sentence
Meaning of "closing force"
closing force: This phrase is often used in the context of doors or windows to describe the amount of pressure or resistance required to fully shut or secure them. It refers to the strength or power needed to close a door or window completely
How to use "closing force" in a sentence
Basic
Advanced
closing force
Closing force to meet different level of traffic.
Stowage bin with closing force assistance.
Continuously regulated and controlled closing force.
Item type closing force robot.
There is therefore a need to reduce the closing force.
Control of closing force and speed.
In addition it gives a method for the measurement of closing force.
Closing force set too high can lead to personal injury.
This is an advantageous construction to increase the relay closing force.
The closing force may be increased or decreased along a range of values.
The permanent magnet provides the air gap closing force.
In this modification the closing force of the closure is further enhanced.
Hinge tensioning screws can be tightened if increased door closing force is required.
The closing force increase contributes to the balancing of the opening torque.
This creates a rather substantial closing force on the rearward valve body.
See also
The closing force has a value within a range of assistive closing force values.
The assist mechanism has a mechanical advantage that changes to provide a closing force.
This hydraulic closing force will obviously be complementary to the mechanical closing force.
Achieving sufficient sealing requires that the closing force of the spring be of a certain magnitude.
The platform features dual assist torsion springs that minimize the opening and closing force.
A gravitational closing force is applied about the center of gravity of each of the panels.
Closers often feature dampers that offer control over the closing force and speed.
After applying an initial closing force the cell can be energized and operation can begin.
Peak force FS is the maximum value of the closing force.
The closing force can be uni-directional or not.
The parting plane T comes to rest on a planar section and a large closing force is ensured.
Would require a tool closing force of approximately 4 tons.
In order to obtain quality manufacture, it is necessary to develop substantial closing force.
You get 4 levels of closing force to meet different level of traffic.
In response, the electrovalve must be dimensioned so as to counterbalance the closing force.
The closing force of the closing mechanism 1 can therefore effectively be adjusted.
Reduced-pressure dressing assemblies for use in applying a closing force.
At the same time, a uniform closing force can be safeguarded by such a clip.
The closing force is applied to keep the half-moulds firmly closed.
Alternatively, in some embodiments, only the average net closing force is considered.
Moreover, the closing force may be adjusted for maintenance purposes of the device.
In yet a further example, the opening may be temporarily closed by a closing force.
As a result, the closing force of the mechanical inlet valve referred to above is reduced.
For subsequent missions, the hinge surfaces were burnished to reduce the closing force.
The magnitude of said closing force is adjusted by the current supplied to electromagnetic coil 24.
These magnetic losses are therefore minimized, which leads to an increase of the closing force.
Depending on the means selected, the closing force for instance can be determined herewith.
Surprisingly, crocodiles have a low jaw opening force compared to the powerful closing force.
The spring closing force is directly related to spring material thickness, material and geometry.
Moreover, partly as a result of this, the required closing force can be kept low.
However, the closing force does not increase linearly with inward displacement toward the open position.
Afterwards, the process may provide the increased closing force by the assist mechanism.
The reduced-pressure treatment may include reduced-pressure therapy or a reduced pressure generated closing force.
Output can be increased - without changing the closing force or the need for more space.
The closing force is independent of the size, configuration and location of the O-rings.
You'll also be interested in:
Examples of using Closing
Show more
You are closing the store to play hockey
She remembers because the diner was closing
Pointing beyond the closing time of a checkpoint
Examples of using Force
Show more
With the sheer force of the blast
Force them to tell us where the shards are
Excessive use of force by law enforcement officials
