Examples of 'closing of the valve' in a sentence
Meaning of "closing of the valve"
Closing of the valve: This phrase refers to the action of shutting off a valve to stop the flow of liquid, gas, or other substances
How to use "closing of the valve" in a sentence
Basic
Advanced
closing of the valve
Owing to the slow closing of the valve.
Insecure closing of the valve may result in burning of the compressor.
An overpressure is produced by the closing of the valve.
Closing of the valve.
This provides for a reliable closing of the valve.
Closing of the valve can be obtained by following a substantially linear law.
The inlet pressure has no influence on opening or closing of the valve.
Excessive closing of the valve causes the machine to go into surge operation.
The inlet pressure has no influence in either opening or closing of the valve.
Thus, automatic closing of the valve is easily achieved.
Displacement of the piston controls opening and respectively closing of the valve.
Moreover, the opening and closing of the valve can be controlled by the program.
This ensures that a very positive seal is established on closing of the valve.
So, the full opening and the full closing of the valve are quasi-instantaneous.
Differential pressure across the valve causes automatic opening and closing of the valve.
See also
Closing of the valve and stop the brushes after a total time of 6/7 seconds.
The reason for this being that it provides for a more reliable closing of the valve.
Complete closing of the valve is obtained by screwing the cap ( 33 ) all the way.
The correct setting is obtained when complete emptying terminates just before closing of the valve.
The opening and closing of the valve 9 is shown in Figs . 4A and 4B.
However, the backflow pressure supports the closing of the valve.
As indicted hereinabove, a new measured reference value is acquired upon each closing of the valve.
Canine valvular disease ( CVD ) results from the faulty closing of the valve during heart contractions.
Metallic sealed steam traps are no shut-off elements ensuring a tight closing of the valve.
One for opening, the other for closing of the valve.
This value ensures trouble-free stroke movement and closing of the valve.
A lever 3 operates the opening and closing of the valve 2.
The resistance of the vortex valve 1 increases progressively with the closing of the valve 6.
The condition described above corresponds to fluid-tight closing of the valve connector.
A minimum pressure of 0.25 bar differential is required for opening and closing of the valve.
The signal is provided to a controller which controls the opening and closing of the valve 380.
A microprocessor-controller 30 controls the selective opening and closing of the valve 20.
The pressure drop above the plunger 15 results in the closing of the valve 13.
The electronic controller 28 generates a valve signal 29 that controls opening and closing of the valve 20.
You'll also be interested in:
Examples of using Closing
Show more
You are closing the store to play hockey
She remembers because the diner was closing
Pointing beyond the closing time of a checkpoint
Examples of using Valve
Show more
Lift the valve assembly up and out
Grasp black lever on one drain valve
Check valve assembly caps to ensure tightness
