Examples of 'closing pressure' in a sentence
Meaning of "closing pressure"
closing pressure - Closing pressure refers to the amount of pressure or force required to close a valve, lid, or other mechanical component securely
How to use "closing pressure" in a sentence
Basic
Advanced
closing pressure
Every plates is tested under high closing pressure.
Closing pressure can be adapted to the individual structural conditions.
Control of the closing pressure.
Closing pressure valves.
For minimal closing pressure.
Closing pressure valve.
Pressure in the air jet exceeds the closing pressure.
Provides strong closing pressure with minimal operating force.
The pressure differential being defined as a difference between release high pressure and a low closing pressure.
A closing pressure between these two limit values is also defined.
With the hooks and loops engaged and the closing pressure released Fig.
The critical closing pressure is discussed and related to the pressure at zero flow.
As a safety factor, there is a constant positive closing pressure provided by springs.
Closing pressure class SG.
Accurate opening pressure and closing pressure can be done according to customers ' demand.
See also
Breaking occurred in brittle manner, likely initiated by high mold closing pressure.
This action adds additional closing pressure to that generated by the internal sphincter mechanism.
The graph shows a cracking pressure at about 4 psi and a closing pressure at about 3 psi.
The closing pressure is self-regulated through the filtration.
In this way, simply, the desired closing pressure can be obtained and maintained.
The closing pressure on the relief valve 22 is suddenly reduced.
The adjustments substantially comprise, closing pressure adjustment, side adjustment and height adjustment.
At a closing pressure of 240 bar the conductivity was practically zero.
Table II gives the results relating to the maximum closing pressure ( in cm of water ).
In this way, the closing pressure properties of the valve are increased.
Every plates is tested under high closing pressure 21 MPa.
Static closing pressure . bar.
By providing openings, material and weight, cooling time and / or closing pressure can be limited.
Static closing pressure . kPa.
Figure 4 - Ajusting of the door closing pressure.
The linear closing pressure is very low, with a resistant to ageing, weather, UV and ozone.
Silver earrings with semi-transparent red stone and surrounding zirconia . Closing pressure and 5 cm long.
Closing pressure valves . S1C combustion complete.
Tire mold holder → temperature control, closing pressure of 20 tons.
The closing pressure is 2 bar min. and 7 bar max.
Leakage rate A, sealed up to 14 bar closing pressure.
A procedure incorporating the closing pressure ( P2 ) using a standard Marchetti DMT is proposed and evaluated.
Closing pressure valve . S1C burn complete.
You'll also be interested in:
Examples of using Pressure
Show more
No effect on blood pressure or pulse rate was observed
Pressure transmission pipe in the combustion chamber
We were under a lot of pressure because of the family
Examples of using Closing
Show more
You are closing the store to play hockey
She remembers because the diner was closing
Pointing beyond the closing time of a checkpoint
