Examples of 'clutch may' in a sentence
Meaning of "clutch may"
clutch may: implies that there is a possibility of a crucial moment or situation arising, where a clutch performance or action may be required
How to use "clutch may" in a sentence
Basic
Advanced
clutch may
A single clutch may have multiple fathers.
Resting your foot on the pedal also means your clutch may not be fully engaged.
The clutch may have two eggs.
Various known clutches such as a dry clutch and a single disc clutch may instead be used.
The overrunning clutch may be a freewheel assembly.
As additional information, the number of eggs per clutch may also be determined.
A second clutch may be laid if the first is destroyed.
If not, the hydraulic clutch may be damaged.
A second clutch may be laid if the first is unsuccessful.
Do not engage the mowing blades in tall grass, damage to the clutch may result.
The clutch may have a plurality of pressure plates.
Incorrect dismantling of clutch may lead to damage the body.
A clutch may have up to five eggs.
By means of a release assembly the clutch may be brought into the disengaged position.
One clutch may disengage more than one motor.
See also
Eggs are cream colored, and a clutch may have from five to eight eggs.
The clutch may be manually disengaged by manual operation of the handle.
Thus, for example, an electromagnetic clutch may be used for the power transmitting section.
A clutch may be provided between the drive means and the wheel.
The slipping time of the clutch may not exceed 2-3 seconds.
Each clutch may be selectively connectable to the accumulator by means of an associated valve.
Your stator clutch may also seize or break.
The clutch may be attached to the second end portion of the main shaft.
The one way clutch may be a sprag clutch.
The clutch may include an electrical coil disposed within a stationary field shell.
In one simple example, a clutch may simply serve to engage / disengage the transmission output.
The clutch may have two friction discs and accordingly an intermediate internal pressure plate.
In " off " state the clutch may be moved along the shaft.
A clutch may be disengaged pneumatically and engaged by the spring, or vice-versa.
All work on Conax clutch may only be performed with disconnected drive engine.
A worn clutch may require moving the clutch lever farther before the clutch engages.
Oil pressure in hydraulic clutch may not be greater than 16 bar or less than 15 bar.
The clutch may be an on / off type clutch.
The torque transferring clutch may comprise a multi-plate wet clutch pack 222.
Thus, the clutch may advantageously be disengaged during the same procedure to effect a gear shift.
A second clutch may be produced sometimes.
The clutch may lock for a pedaling rate of less than 60 revolutions / min.
Similarly, the clutch may be any known and existing type of clutch.
The clutch may still slip during the run-in time of approx. 2 operating hours.
FIG . 13 shows how the clutch may be controlled by gravity but actuated by the driver.
The one way clutch may be rotationally coupled to the overrunning clutch by a bracket.
Alternatively, the clutch may be described as a latching and mechanical sensing and releasing means.
This clutch may be a Merobel EAT 120 type clutch.
You'll also be interested in:
Examples of using Clutch
Show more
Adjusted to prevent clutch and engine overload
The clutch assembly is threaded on the crankshaft
You got your clutch down here
Examples of using May
Show more
I may decide to teach you something tomorrow
Of these uses oratory may serve as an illustration
This may be helpful if network problems occur
