Examples of 'coat weight' in a sentence
Meaning of "coat weight"
Coat weight: Refers to the heaviness or thickness of a fabric, typically used in the context of clothing garments to describe the quality and warmth provided by a coat
How to use "coat weight" in a sentence
Basic
Advanced
coat weight
Coat weight can be determined by gravimetric comparison.
Solids content coat weight.
Coat weight measurement by the differential ash method.
Adhesiveness may also be increased by increasing the coat weight of the adhesive.
The coat weight was kept even in both experiments.
The brightness of the coated products was proportional to the coat weight as expected.
Coat weight modelling and control of a new coating station.
The percent extractable silicone is defined as the percent loss in silicone coat weight.
Further analysis identified the optimum coat weight of acrylic required to maximise the barrier protection.
Bulking pigments are those which provide coatings having high opacification at a low coat weight.
The second layer may have a total dried coat weight in the same range or less.
The results show that different release profiles can be obtained by varying the coat weight.
The coat weight of the Composite layer includes boththe adhesive and the filler.
Moreover, film gloss is affected by coat weight.
A theoretical coat weight of 4 mg per tablet was applied.
See also
Five passes were made to obtain a coat weight of about 5 gsm.
This coat weight yielded a very foldable, low friction material.
In yet another investigation, the effect of coat weight upon adhesion properties was investigated.
Film coating - coat weight forming and runnability phenomena depending on coating colour rheology.
When this mixture is coated onto the cellulosic fiber, any coat weight is acceptable.
Tracking moisture and coat weight measurements of a pilot-coater.
Latex film was prepared by direct coating on Mylar at 1 mil coat weight.
Control 7 was formed using a dual die but at a low coat weight of removable pressure-sensitive adhesive.
A typical coat weight is suggested to be in the region of 2GSM.
C2 is comprised of a very heavy coat weight of LDPE.
The total coat weight of the coating may be from about 1 to about 30 gsm.
The value of the property which corresponded to a coat weight of 8g . m-2 was found by interpolation.
The dried coat weight of the polyamide DI was measured to be about four g/m2.
The resultant inks were applied to multiply polyethylene based film at a coat weight of 10 ± 1 gsm.
The dried coat weight of the polyamide FFM was measured to be about four g/m2.
The coating was applied with a Myer rod at a coat weight of about 5 g/m2.
The coat weight applied was about 6 g/m2 solids.
Example C - Kaowool with a coating of silicon carbide of coat weight 150 grams per square metre.
The coat weight was 20 pounds per ream.
The coating was applied to provide a final coat weight of 22 g/m2.
A coat weight of approximately 5 g/m2 was obtained in each case.
The coating was applied to provide a final dried coat weight of about 17 g/m2.
This yielded a dry coat weight of 8.5g/m2 which was within the target required.
Tapes were produced by coating the formulated adhesives on a release film at 125 g/m2 coat weight.
The dried coat weight of the size coat ranges from about 1 to about 3 gr/m2.
For the samples prepared without primer, the coat weight of the adhesive was approximately 17 g/m2.
The coat weight of the permanent pressure-sensitive adhesive to removable pressure-sensitive adhesive was 14:7.
In some embodiments, the polymer matrix has a coat weight of greater than about 10 mg/cm2.
After drying the dry-coat weight is typically 50 % that of the wet coat weight.
A paperboard container according to claim 5 wherein the amorphous nylon layer has a coat weight of 4-12 lbs / ream.
The emulsions were directly coated onto 2 ml Mylar at a coat weight of 25 g/m2.
A suitable protective layer is VHL31534 supplied by Sun Chemical applied with coat weight of 2gsm.
