Examples of 'coated panels' in a sentence
Meaning of "coated panels"
coated panels ~ panels or surfaces that have been covered or treated with a layer of coating or material, often for protection, insulation, or aesthetic purposes
How to use "coated panels" in a sentence
Basic
Advanced
coated panels
The coated panels obtained were then tested.
Method for the production of coated panels.
The coated panels are then inspected.
The flow is visually evaluated on coated panels.
The coated panels were tested as follows.
Test paints were applied to old alkyd coated panels.
Method for manufacturing coated panels and a press element.
The coated panels were air dried at ambient temperature conditions.
Appearance and physical properties were measured on the coated panels.
The appearance of the coated panels was evaluated using the following tests.
The lattices were deposited directly on cured electrodeposited coated panels.
The coated panels were subjected to increasing amounts of impact until the coating cracked.
The calibration standards in common use are for plastic membranes or coated panels.
The coated panels were evaluated for corrosion resistance by the following test methods.
The appearance and physical properties of the coated panels were measured as follows.
See also
The coated panels were subjected to the same cathodic disbondment test described hereinabove.
Film cure was tested by rubbing the coated panels with an acetone soaked rag.
The such coated panels had a golden appearance and showed a homogeneous coating.
The rod hits the impinger which in turn hits the coated panels.
The coated panels were exposed to the ambient conditions in a laboratory for five days.
Appearance was measured on the coated panels before and after Water Soak Testing.
The coated panels were then tested for humidity resistance and the results are reported below.
After the drying, the coated panels were inspected and tested.
The coated panels parallel or at 0 degree to the observer provided a green color.
In a second series of evaluations, the coated panels were cured and tested as follows.
The silicate coated panels then were removed from the silane containing solution and dried.
The present invention relates to a hot-plate press for forming coated panels.
The slurry coated panels were air dried for 3 hours.
This invention relates to a method for manufacturing coated panels, as well as to coated panels.
The coated panels were then flashed at ambient temperature for 3 minutes.
Figure 1 shows some steps in a method for manufacturing coated panels 1.
Using freshly coated panels gave greater consistency rather than re-using test panels.
Example 6 In the same way as described in Example 1, several coated panels were prepared.
The coated panels are then optionally rinsed with a cold water spray rinse for 30 seconds.
Saves time, money and tools . Even greater cutting quality for coated panels.
Test of the coated panels gave essentially the same result as given in Example 1.
Coated panels were uniformly bent using the BYK-Gardner Cylindrical Mandrel.
The steel Plastisol coated panels are guaranteed for 25 years.
The coated panels were fabricated ( dry ) with no additional lubricant.
The appearance of the coated panels was evaluated using the tests discussed above in Example 2.
The coated panels were then allowed to cool to room temperature for 24 hours.
Some of the coated panels were tested by immersion in cold tap water for 15 days.
The coated panels obtained in Example ( 2 ) were then compared in a series of performance tests.
The coated panels were placed in fresh water at room temperature and 30°C.
The coated panels were examined for adhesion in accordance with the ASTM D3359M procedure.
The coated panels were then tested for corrosion resistance using NSS according to ASTM B117.
The coated panels were then baked at 177°C to form hard glossy coatings.
The coated panels passed a 0.32 cm conical mandrel test and had a T-bend flexibility value of O-T.
You'll also be interested in:
Examples of using Coated
Show more
Mm vinyl coated steel retracting security cable
Steel wire liners can be coated or noncoated
Uniformly coated electronics for improved stability
Examples of using Panels
Show more
Support large panels to minimize the risk
Panels indicating the type of craft concerned
The lights on these panels operate as follows
