Examples of 'coating thicknesses' in a sentence
Meaning of "coating thicknesses"
coating thicknesses: The measurement of the depth or amount of a covering or layer applied to a surface
How to use "coating thicknesses" in a sentence
Basic
Advanced
coating thicknesses
Homogeneous coating thicknesses with a smooth surface.
The microscopy images provided measurements of coating thicknesses.
The coating thicknesses were then dried and irradiated.
This type of electrode is generally produced with thin or medium coating thicknesses.
The higher coating thicknesses give higher permeabilities.
Which measures changes in magnetic flux as the flux passes through various coating thicknesses.
The coating thicknesses of the plate and the coating are not relative.
The data indicate that useful bond strengths are obtained at a number of aziridine coating thicknesses.
These coating thicknesses are extremely difficult to fabricate without cracking the coatings.
Solderability from plasma coated PCB Different coating thicknesses were evaluated regarding the solderability.
Coating thicknesses can be varied to produce the desired reflectance and transmittance properties.
Typical coating conditions are known to the skilled person, as well as suitable coating thicknesses.
The desirable coating thicknesses are sufficient to provide resistance to corrosion while having adequate flexibility.
Irrespective of any temporary protective films ; other coating thicknesses may also be supplied by agreement.
Coating thicknesses and curing or drying mechanisms will similarly vary with the coating art.
See also
Also, the layer thickness can be less than the known prior art coating thicknesses.
Preferred average coating thicknesses are less that 30 micrometers as measured perpendicularly from the microprojection surface.
ITO has a more uniform crystal structure and, therefore, is clear at most coating thicknesses.
Such coating thicknesses are useful, for example, where the cured cyclodextrin composition is a pressure-sensitive adhesive.
Glass thickness is given in inches and coating thicknesses are given in Angstroms . Tvis Tsol.
The coating thicknesses are identical to those in Example 1.
Contour accuracy through coating thicknesses < 1 µm.
Adhesive coating thicknesses are given below, Pressure Coating Thickness.
More precisely, the sheets tested have coating thicknesses of 8 um.
Typical coating thicknesses for parylene are between 5 and 25 microns.
Immersion times vary between 2.5 - 5 min. which provides the necessary time to deposit coating thicknesses.
More preferred coating thicknesses are about 1 micrometer to about 10 micrometers.
Similar results were obtained by repeating the experiment using coating thicknesses of TWG 10 % and 15 %.
Drug coating thicknesses greater than about 1 µm resulted in aerosol purity levels below 97 %.
The coatings exhibit high hiding power at coating thicknesses of 2-10 microns, and excellent corrosion resistance.
Coating thicknesses are preferably in the range of 2-40 microns.
The samples received the same coating thicknesses and treatment as Examples 23-27.
Coating thicknesses obtained by this galvanization method range from 10 to 50 microns.
Further, these increased coating thicknesses appear to improve adhesion after weathering . EXAMPLE 2.
Typical coating thicknesses for the abradable coating materials described herein are about 0.5 mm to 5 mm.
The total coating thicknesses were about 300 µm.
Typical coating thicknesses will be in the range 5 - 20 mg polymer per cm2 of capsule surface.
Particularly preferred coating thicknesses range from about 15 microns to be about 100 microns.
Dried coating thicknesses of 2-4 µm were obtained.
The higher coating thicknesses give higher permeabilities . Example 8.
Preferred coating thicknesses are in a range up to 300 micrometres.
You'll also be interested in:
Examples of using Coating
Show more
This coating is liable to be damaged with time
Determination of tin coating mass and hardness
Stir coating material before commencement of work
Examples of using Thicknesses
Show more
Greater layer thicknesses are poured in several layers
Do not attempt to cut panels of thicknesses that
Other layer thicknesses are possible upon request
