Examples of 'cobalt content' in a sentence
Meaning of "cobalt content"
cobalt content: This term refers to the amount or concentration of cobalt present in a substance, often used in discussions related to materials, minerals, or products
How to use "cobalt content" in a sentence
Basic
Advanced
cobalt content
An overly low cobalt content increases costs.
Consequently the examples shown in table 7 were milled with a higher cobalt content.
An increase in cobalt content typically leads to an increase in toughness.
The compressive fatigue strength increases with a decreasing cobalt content and with decreasing grain size.
The cobalt content of the saprolite layer is negligible.
This is the more so, inasmuch the cobalt content of the resin systems is higher.
The cobalt content is also beneficial to the superalloy 's solid solubility.
After sintering, the coarse grained layer in the center is reduced in cobalt content.
How does the cobalt content influence the various parameters?
Figure 12 shows the compressive strength of various grain sizes in relation to the cobalt content.
The cobalt content of the zinc-cobalt alloy coating is determined by atomic absorption spectral analysis.
Figure 1 shows a graph of hardness and cobalt content versus the distance from the edge.
They are single phased, with thespinel structure, and a cell parameter varying with the cobalt content.
The cobalt content of the dendrimers was determined using X-ray fluorescence spectroscopy.
Thus, coating C 3 has better abrasion resistance properties due to the high cobalt content.
See also
The cobalt content in the wax product was on average between 5 and 10ppm.
Figure 4, hardness in relation to the cobalt content and grain size.
The cobalt content of the catalyst was 13 % by weight.
Figure 16 shows the thermal expansion in relation to the cobalt content.
Preparations normally resulted in final cobalt content between 4 % and 6 % at suitable viscosity.
The cobalt content will be limited to 2 %.
Second category consists of iron-cobalt alloys having a high cobalt content of around 50 %.
Figure 5 is a graph showing cobalt content versus the distance from the previously Cr3C2-covered surface.
The adhesion reaction even slows down with increasing cobalt content ( samples C and B in CMPD2 ).
The cobalt content of the solution is 3.4 percent by weight.
Lithium cobalt(III) oxide with a cobalt content of at least 59.
The cobalt content less than or equal to 0.50 % improves the resilience of the welds.
Cobalt naphthenate used in a comparative example had a cobalt content of 10.1 %.
The final cobalt content is 6 %.
The resin composition had a phosphorus content of 171 ppm and a cobalt content of 18 ppm.
The cobalt content to which this addition can be made should vary from 5-12 %.
Lithium cobalt (III) oxide with a cobalt content of at least 59.
Inconel 690, Low cobalt content for nuclear applications, and low resistivity.
Around 15 % of the cost of NMC is based on the cobalt content.
You'll also be interested in:
Examples of using Cobalt
Show more
Cobalt blue with the racing stripe
The percentage of cobalt in the fertilizer is given by
Cobalt pigment is used in porcelains and glass
Examples of using Content
Show more
On the product content and environmental release
Content management interfaces for web systems
Adjusts style and content when necessary
