Examples of 'cold water pipe' in a sentence
Meaning of "cold water pipe"
Cold water pipe: Refers to a plumbing pipe that carries cold water to different fixtures or appliances in a building. It is part of the water supply system and helps distribute cold water throughout the property
How to use "cold water pipe" in a sentence
Basic
Advanced
cold water pipe
Refrigerator is not connected to cold water pipe.
It looks like the cold water pipe is leaking from.
The refrigerator is not connected to a cold water pipe.
Locate the cold water pipe closest to water treatment system.
Through floor to basement cold water pipe.
Connect the cold water pipe to the cold water connection on the unit blue.
A copper or galvanized cold water pipe may.
The cold water pipe and MAW wall fitting must be safely secured.
Under sink to cold water pipe.
Preferably the first inlet is connected to a hot water pipe and to a cold water pipe.
Fasten shutoff valve to cold water pipe with pipe clamp.
Make sure that the refrigerator is connected to a cold water pipe.
Place the pipeline between the cold water pipe and the refrigerator.
The cold water pipe enters on one side of the store, towards the bottom.
Connect the appliance to a cold water pipe only.
See also
Air in the cold water pipe will destroy the bare-wire heating system of the MTH.
Make sure it is a cold water pipe.
The cold water pipe and AHo 40 MTH wall fitting must be safely secured.
Through wall to utility room cold water pipe.
Typical areas are where the cold water pipe passes through or runs along a cabinet wall.
Install the adaptor with connector on the cold water pipe.
Refrigerator is not connected to a cold water pipe - Make sure the refrigerator is connected to a.
The water line must be connected to the cold water pipe.
The distance of the cold water pipe must reach 15 centimeters.
Connect the green wire from the appliance conduit to a grounded cold water pipe as shown.
The safety valve on the cold water pipe is dripping?
A cistern SK of a toilet T is connected only to the cold water pipe KWL.
Since cooling is not needed, the cold water pipe 30 is not in use.
Installation of non-return valve in cold water pipe.
In a city, the ground wire can connect to a metal cold water pipe that goes underground.
RE: How to calculate the saved Energy resulting from Cold water pipe isolation.
The situation is similar with the cold water pipe KWL.
The two inflow conduits 1a are respectively connected with a cold water pipe and a hot water pipe.
Using a grounded drill, drill a X-inch hole on the cold water pipe you have selected.
Unit does not switch on . - Water pressure in cold water pipe too low.
Using a grounded drill, drill a V4-inch hole in the cold water pipe you have selected.
In this case the pump 55 is accommodated in the cold water pipe 52.
The cold water enters into the cooler 22 through the cold water pipe 23.
Complying with plumbing codes, install a fitting on the cold water pipe to adapt 3 ⁄ 8 ″ OD tubing.
You'll also be interested in:
Examples of using Cold
Show more
You will feel cold with no shoes
Cold performance characteristics for trailer brakes
One can only be cold in a warm country
Examples of using Water
Show more
There is no water damage or fire extinguisher residue
Do not clean the engine with water
Water freezing in the system will break it
Examples of using Pipe
Show more
Pressure transmission pipe in the combustion chamber
Pipe is the heaviest wave in the world
Two pieces of pipe and a bicycle chain
