Examples of 'cold worked' in a sentence
Meaning of "cold worked"
cold worked - This phrase typically refers to a metalworking process where the metal is shaped or formed at room temperature without the need for additional heat
How to use "cold worked" in a sentence
Basic
Advanced
cold worked
The metal may also be cold worked.
It can be cold worked but is not heat treatable.
These alloys are ductile and can be cold worked.
Cold worked alloy steel bar.
Mild and cold worked metal.
This metal can become slightly magnetic when it is cold worked.
Capacity for being cold worked is good.
The cold worked sections offer many technical possibilities.
If the product has not been cold worked before complementary tempering,.
If better properties are required, then it may be heat treated or cold worked.
The liner is cold worked by cold rolling instead of by cold swaging.
And in order to increase its resistance, these steels are often cold worked.
Before the heat treatment the cold worked alloy material is preferably subjected to mechanical straightening.
Annealing can be performed, which will put it in a state to be easily cold worked.
Both annealed and cold worked wire were tested and Table III shows the result.
See also
For example, the following work procedures would apply to wire from a previously cold worked source,.
In Cold worked.
Shown in Figure 7b is an example of a temperature versus diameter plot for a cold worked part.
Furthermore, the cold worked surfaces have even tighter tolerances.
Essentially non-magnetic, becomes slightly magnetic when cold worked.
Does not become magnetic when cold worked or cooled to sub-zero temperatures.
The cold worked welded assembly undergoes post-weld aging to obtain a final metallurgical temper.
When the product has been cold worked after quenching and before tempering,.
A cold worked metal will start to soften, i.e. recrystallize when heated.
The stent of claim 11 wherein the alloy is a cold worked alloy.
If the product has been cold worked after quenching and before complementary tempering,.
To overcome this, the metal can be alloyed and / or cold worked.
Certain of the cold worked articles may have elongation of at least 10 %.
Accordingly, the entire grid 40 or portions thereof may be cold worked by reductions in thickness.
Non-hardenable ; non-magnetic in the annealed condition, and slightly magnetic when cold worked.
Products available in the Cold worked condition, 2H, work hardened.
Table 6 - Dimensions and properties of hot rolled and cold worked bars.
T8-solution heat treated, cold worked and artificially aged.
Hot worked + heat treated + descaled + cold worked + bright annealed.
At this point, the tubeshell is cold worked to 70 % as in the above processes.
You'll also be interested in:
Examples of using Cold
Show more
You will feel cold with no shoes
Cold performance characteristics for trailer brakes
One can only be cold in a warm country
Examples of using Worked
Show more
Fiona worked very hard for this
Sam was undermining everything you worked for
I have worked here for seven years
