Examples of 'color density' in a sentence
Meaning of "color density"
color density: refers to the darkness or thickness of a color in an image or a material
How to use "color density" in a sentence
Basic
Advanced
color density
Press or to adjust the color density.
The color density was also measured and compared to the standard.
Very high color density.
The figures shown are the measured values of color density.
Adjust color density.
The images had good resolution and color density.
A higher color density in the middle área means ink refusal.
Colored images exhibited good color density and uniformity.
A correct color density indicates that no change in color density is needed.
The image showed good resolution and color density.
The color density was evaluated before and after the testing.
The excess ink changes the color density of subsequent pixels.
Color density is measured with a reflectance densitometer as described in the previous example.
This quality is important if print clarity and color density is to be achieved.
The color density of the unknown sample is compared with an uninfected control.
See also
What you are doing is checking for color density as it thins towards the rim.
A group of experts were then asked to rate the samples according to color density.
Compositions that introduce variations in color density into dyed cellulosic fabrics.
A change in the color density due to a temperature change progresses along the arrow.
Tg is defined as the temperature corresponding to the midpoint in color density during decoloration.
Consider decreasing color density and the strength of their opposition as you approach the horizon.
The patch has no defects and increasing amounts of ink result in increasing color density.
Added original image 's color density to image.
The thickness of the color printing layer is changed according to a desired printing color density.
Consequently, the desired color density could not be obtained.
The greater the value, the higher the initial color density.
Determining a color density of each selected color for the selected framework ;.
From this combination is obtained a cured product having improved color density and fading rate.
Color density is generally better, or easier to achieve than with dye-based inks.
These recording systems require a high color density on an image-recording sheet.
Accordingly, the color density of a visible image formed on the photosensitive material is increased.
Moreover, these sheets can enhance the color density and form a clear image.
The remaining time depends not only on the time recorded, but on the color density.
Step of determining a color density of each color selected for the selected framework ;.
Incubation for 5 minutes proceeded to allow for dye formation before reading the color density scores.
From the measured results, the color density was calculated according to the following formula.
As specified above, Color values will be taken from the Color density options.
The color density was low, and banding was observed at the Solids Color portion.
For the resulting ISO image, the color density was decreased.
Initial color image density, The greater the value, the higher the initial color density.
Picture color density f Picture hue Adjust the value with the VOLUME / SELECT buttons 3.
This makes it possible to control the color density of the lens 22 to be dyed.
Color density of dot-blots were measured and are plotted against concentration of 6-azido-tryptophan.
When the volume average particle size exceeds 1.0 µm, the color density may possibly lower.
The change ( % ) in developed color density was calculated using the following equation.
One measure of the intensity of a color is the color density unit ( CDU ).
During a step 104, the color density of each selected color for the selected framework is determined.
When the volume-average particle size exceeds 1.0 µm, color density might be decreased.
Color density was measured using a Gretag SPM55 spectrophotometer.
Beforehand, the L * a * b and color density of the sample must be measured.
You'll also be interested in:
Examples of using Color
Show more
Absorbing color with its tinctorial qualities
Combinations of pulsating and flashing color change
And that color hair is the gateway
Examples of using Density
Show more
Reduces bulk density and increases porosity
Density and volume under changes in temperature
Measure the particle density of the thermosphere
