Examples of 'column temperature' in a sentence
Meaning of "column temperature"
Column temperature: The specific temperature maintained in a chromatography column during the separation of compounds. This phrase is commonly used in analytical chemistry and related fields
How to use "column temperature" in a sentence
Basic
Advanced
column temperature
Column temperature will be controlled by an external heater.
Cooling Bath with column temperature modifier attachment.
Column temperature room temperature.
The LC separation is often largely influenced by the column temperature.
The column temperature is maintained at ambient room temperature.
Accordingly, an increase of the column temperature results in higher retention times.
Column temperature was controlled using insulating and heating tape.
High performance liquid chromatograph, allowing thermostatic control of column temperature.
The column temperature program is as defined hereinafter,.
The colorless compound so obtained had the following appearance, column temperature and analysis,.
Does the column temperature change during the washing with hydrochloric acid?
Unless otherwise stated, it is assumed that the 232 column temperature is to be constant.
Maximum column temperature depended on quantity of fuel, duration of fire, type of fuel.
It is evident that the recovery of all peaks was higher at a column temperature of 70°C.
The form, column temperature and elemental analysis data of this product were as follows.
See also
When using a styrenic type II resin, a column temperature is preferably used less than 45°C.
The column temperature was maintained at 45 degrees.
When using a thermally stable resin, a column temperature is preferably used which is more than 75 °C.
Column temperature was kept at ambient and column flow rate was maintained at 1.0 ml / min.
Column flow rate and detector wavelength were as above, while the column temperature was 50°C.
Moreover, adjustment of column temperature allows one to modulate the stringency of hybridization reactions.
Hot water was circulated through the column jacket until the internal column temperature reached 90°C.
A decrease in the internal column temperature with the recycled HA solution is illustrated in Fig . 3.
Analysis may be performed at 23 °C column temperature.
A column temperature of 65C was maintained during purification.
A rising rate of the column temperature is made 4°C/hour.
The column temperature is maintained at 65°C by means of a water bath with circulating water.
An analysis was made at a column temperature of 60°C.
Column temperature was maintained at 35°C by an Eldex column heater.
The analytical column temperature was held at 40 °C.
Column temperature was maintained at 60°C using a Waters column oven.
HPLC was carried out at a column temperature of 40°C and a flow rate of 1 ml / min.
Column temperature was set at 30 deg C. The gradient elution followed the following profile,.
Analysis was carried out with an injection load of 5 µl and column temperature of 40°C.
The feed gas and column temperature in this case were changed to 55°C.
The desorbent was preheated to a temperature of 60°C, resulting in a column temperature of approximately 60°C.
A column temperature of 65 C is maintained during purification.
The HPLC was carried out with a column temperature of 40°C and a flow rate of 1 mL / min.
The column temperature was at rt with the flow rate of 1.0 mL / min.
Analysis was performed at 23 °C column temperature.
The column temperature is 40deg.
The distillate temperature is -29 degrees C, and the bottom column temperature is about 66 degrees C.
The column temperature is then maintained at 0°C for 25 minutes.
The HPLC column temperature was maintained at 15°C.
The column temperature is maintained at 40°C for analysis.
The column temperature was maintained at 50°C using a water jacket.
The column temperature is then maintained at this temperature for 25 min. at 0°C.
The column temperature is 30 degrees Celsius and the injection volume was 10 µL.
Increasing column temperature above 40 - 60 ° C may cause some technical difficulties especially for capillary array instruments.
Column temperature was set at 30 ° C and injection volume was 2 µL.
You'll also be interested in:
Examples of using Temperature
Show more
Manufacturer of the separate temperature measuring equipment
Actual temperature below low temperature value
Select the desired temperature with and
Examples of using Column
Show more
This column also captures those situations
This marks my final column in this magazine
A column matrix is a matrix with a single column
