Examples of 'combustion efficiency' in a sentence
Meaning of "combustion efficiency"
combustion efficiency: This phrase refers to the effectiveness of a combustion process in converting fuel into energy with minimal waste or byproducts
How to use "combustion efficiency" in a sentence
Basic
Advanced
combustion efficiency
High combustion efficiency and environmental protection.
One is to improve the combustion efficiency of plant.
High combustion efficiency at all operating conditions.
This reduces the fuel combustion efficiency.
Increased combustion efficiency where combustion plant employed.
This increases the combustion efficiency.
The combustion efficiency should be checked.
This is due to a higher combustion efficiency in the engine.
Combustion efficiency measured by lambda probe.
Regulations for wood combustion efficiency.
Combustion efficiency will be equal.
Many attempts have been made to improve combustion efficiency.
Combustion efficiency also varies with the fuel being burnt.
This gauge measured the combustion efficiency of the engine.
The furnace temperature is reduced as is the corresponding combustion efficiency.
See also
Optimize combustion efficiency.
This preheating of the air improves the combustion efficiency.
Actual combustion efficiency.
This regulator must be adjusted to optimise combustion efficiency and parameters.
The increased combustion efficiency enables a higher compression ratio to be used.
Nanocerium oxide particles are added to diesel fuel to increase combustion efficiency.
Practical combustion efficiency.
They need to have a relatively low water content for combustion efficiency.
This increases the fuel combustion efficiency at least during idling.
The combustion efficiency is a minimum when the burners operate at low power.
The cooling and condensing of intake air improves engine combustion efficiency.
The heater is of high combustion efficiency and responds quickly to operational changes.
Special pistons with optimized bowls in the center to improve combustion efficiency.
The activities affect the combustion efficiency of five low pressure boilers.
Computerised control of the main combustion parameters enables the combustion efficiency to be improved.
Low combustion efficiency also results in a visible plume that is aesthetically objectionable.
The direct result thereof is higher combustion efficiency and reduced workpiece oxidation.
Flare combustion efficiency determination through trace gas and particle emissions measurement.
The engine will sound quieter than before due to higher combustion efficiency.
These changes improve combustion efficiency and allow higher torque at lower speeds.
Provincial procedures for quantification and assumptions regarding combustion efficiency of fuel gas.
The combustion efficiency appeared to be independent with regard to the scale and the system.
This higher octane allows for increased engine compression and combustion efficiency.
The mandatory indices regarding technical combustion efficiency and flue gas emissions are observed.
Combustion efficiency is normally higher for liquid and gas fuels as compared to solid fuels.
The firing head position adjustment is made in order to obtain the best combustion efficiency.
Combustion efficiency can reach complete combustion using the theoretically correct amount of oxygen.
This practice runs the biomass boiler at full output and at peak combustion efficiency.
Combustion efficiency is higher for liquid and gaseous fuels than for solid fuels.
The priority mode of combustion is the one which provides the best combustion efficiency.
Fuel moisture has the biggest influence on combustion efficiency and the amount of smoke generated.
Developers of combustion systems teach that additional oxygen saturation of fuel increases combustion efficiency.
Nevertheless its presence does not reduce a high combustion efficiency and cleanness of the fireplace glazing.
It tends to produce propellants which burn very rapidly and with very high combustion efficiency.
A thorough combustion efficiency check involves measuring both the flue gas temperature and carbon dioxide concentration.
You'll also be interested in:
Examples of using Combustion
Show more
Flame disk or combustion heads dirty or worn
Combustion system should work at lower temperatures
Do not abstruct the combustion or ventilation air
Examples of using Efficiency
Show more
Improve the energy efficiency of a shopping centre
Efficiency and emissions requirements of combustion equipment
Liberalisation enhances efficiency of local insurance market
