Examples of 'combustion temperature' in a sentence
Meaning of "combustion temperature"
combustion temperature - the temperature at which a substance will undergo combustion
How to use "combustion temperature" in a sentence
Basic
Advanced
combustion temperature
The combustion temperature must be continuously recorded.
Vaporization temperature is too close to the combustion temperature.
The combustion temperature is too low.
Turbine efficiency is strongly correlated with combustion temperature.
Maximum combustion temperature of the fuel.
This prevents excessive increase of the combustion temperature.
The combustion temperature can be lowered in a variety of ways.
It appears this phenomena is also a function of combustion temperature.
Combustion temperature of the particulates.
The oxygen source raises the combustion temperature.
High combustion temperature.
Another way to improve efficiency is to increase the combustion temperature.
Especially the combustion temperature can be well controlled in the invention.
Nitrogen undergoes an oxidisation process which depends on combustion temperature.
Because the combustion temperature is not increased no great discharge losses occur.
See also
Charcoal can then be used as a fuel with a higher combustion temperature.
That is to say derivatives of the combustion temperature are used to control the engine.
A principal factor affecting the boiler performance is the combustion temperature.
They have a low spontaneous combustion temperature and a high burning rate.
The combustion may be characterized specifically by the actual combustion temperature.
Water may be added to lower the combustion temperature and reduce soot formation.
This fuel combusts in the cylinder and increases the combustion temperature.
The power available at constant combustion temperature and at constant air flow rate is greater.
The recirculation of cooled exhaust makes it possible to control the combustion temperature.
This maintains a high combustion temperature and all released matter is burnt to the optimum.
Thus this reaction occurs at a temperature lower than the normal combustion temperature.
The combustion temperature is reduced also in the case where the ignition timing is retarded.
Such rapid combustion leads to an increased combustion temperature within the combustion chamber.
The drawback with catalytic conversion is the inability to control the secondary combustion temperature.
The combustion temperature of the LNG is different from that of the oil.
It is widely known that NOx emission can be reduced by reducing the combustion temperature.
That is, the combustion temperature can be kept low.
These are the products of nitrogen and oxygen that result from high combustion temperature.
However, such a high combustion temperature leads to certain disadvantages.
Here the entire material is incinerated under controlled conditions ensuring a high combustion temperature.
The combustion temperature is controlled based on the temperature sensor 90 readings.
Production of nitrogen oxides during fossil fuel combustion increases with combustion temperature and residence time.
As a result of the combustion temperature being high, the linear burning velocity is small.
Cold EGR further reduces the increase in PM due to reduction in peak combustion temperature.
Accordingly, reduction of the combustion temperature and NOx can be realized.
These are the result of three elements including air, fuel and combustion temperature.
In the conventional incinerator, the combustion temperature is so high that aluminum m . p.
If other fuels are used, a temperature control can be necessary, depending on the combustion temperature.
By high temperature, it is meant the typical combustion temperature of an internal combustion engine.
The formation of nitrogen oxides ( NOx ) in a combustion engine increases with increasing combustion temperature.
The EGR exhaust gas recycling system reduces the combustion temperature and therefore NOx emissions.
There are certain well-known practical limitations which regulate the acceptable maximum combustion temperature.
Initially Increased air temperature increases combustion temperature and hence NO x formation.
As the fuel / air ratio is increased, the substrate temperature closely matched the adiabatic combustion temperature.
As a result, the maximum combustion temperature of the air-fuel mixture is lowered.
You'll also be interested in:
Examples of using Combustion
Show more
Flame disk or combustion heads dirty or worn
Combustion system should work at lower temperatures
Do not abstruct the combustion or ventilation air
Examples of using Temperature
Show more
Manufacturer of the separate temperature measuring equipment
Actual temperature below low temperature value
Select the desired temperature with and