Examples of 'compacting pressure' in a sentence
Meaning of "compacting pressure"
Compacting pressure: This phrase refers to the force exerted to reduce the volume or compress something. In engineering or manufacturing contexts, compacting pressure is used to create denser materials. It can also be used metaphorically to describe the intensity of a situation or stress
How to use "compacting pressure" in a sentence
Basic
Advanced
compacting pressure
Hardness is a function of the applied compacting pressure.
Lower compacting pressure leads also to higher porosity.
The same relationship exists for the compacting pressure.
Reduction in the compacting pressure has also been attempted.
The increase of retention is observed when the compacting pressure increases.
Means for applying compacting pressure against the cutting template.
The coils 1 are then again compacted to the aforementioned compacting pressure.
Again in this case a doubling of the compacting pressure is obtained compared with traditional pressing.
The compacting pressure increases with the carbon and oxygen contents of the annealed powders.
Therefore, a worker can conveniently adjust the workpiece compacting pressure.
Applying compacting pressure against the cutting template ;.
The mold 12 has mechanical characteristics enabling it to withstand the compacting pressure.
Therefore, high compacting pressure is preferable.
FIG . 3 illustrates the effect of oxygen and carbon contents on compacting pressure.
As the compacting pressure was higher, the green density was higher.
See also
Figure 5 shows the relationship between the compacting pressure and the green density of three cases.
The compacting pressure depends on the instantaneous area obtained on impact ( other things being equal ).
Figure 5 is a graph showing the relationship between compacting pressure and green density in Evaluation Test 1.
The higher the compacting pressure is, the higher the density of the obtained compact becomes.
Simultaneously or afterwards, a strip of plastic imparting compacting pressure 11 is applied.
The fine powders used, compacting pressure and sintering conditions were as follows.
The ejecting pressure can be not more than 3 % of the compacting pressure.
In each case, as the compacting pressure was higher, the green density was higher.
FIG . 4 illustrates the variation of green density with the compacting pressure.
In a variant, the compacting pressure may be applied after beginning to inject the slip i . e.
The mixes were compacted at a compacting pressure of 230 MPa.
The compacting pressure P 2 is maintained during the cooling phase.
The mixes were compacted at a compacting pressure of 600 MPa into tensile test bars.
When the compacting pressure was 686MPa or more, the ejecting pressure decreased contrarily.
Figure 14 is a graph showing the relationship between compacting pressure and ejecting pressure in Evaluation Test 6.
Surface state, For a compacting pressure of 80 bars, the surface state of compositions 2 and 3 is satisfactory.
From these three powders, specimens were compacted at a compacting pressure of 400 MPa.
In this case the maximum compacting pressure reaches values close to 300 bar.
A process according to claim 9 wherein the compacting pressure is at least 1000 bar.
You'll also be interested in:
Examples of using Pressure
Show more
No effect on blood pressure or pulse rate was observed
Pressure transmission pipe in the combustion chamber
We were under a lot of pressure because of the family
Examples of using Compacting
Show more
It was the first true compacting garbage truck
A final compacting is done by closing the outer matrices
Positional and form stability when compacting
